offset Printing Machine
1)Ink rollers:14 (3 form inking rollers)
2)Single Color
3)Max.printing area:454*345mm
offset printing machine
offset printing press
paper printing machine
CY47IINP single color offset printing press are added with NP units on the basis of II generation(Three ink rollers and two water rollers ) offset presses.In addition to all the functions of single color offset presses,they also have the advantages of beautiful color and solid printing with large ink amount as second-generation offset presses.They are really multi-functional,widely applicable,and high quality printing machines.
1)Capability:inking device of each unit has 14 ink rollers including 3 form rollers,guarentee the high precise printing quality,which can improve the efficience and reduce the cost.
2)Easily operate:water supplying,ink supplying and platform pressing each unit can be finished at different lever with the same handle,joint pressure of printing rollers is controlled by an electric eye,which is more reliable and easy to be regulated.
3)Accurate orientation:adopt front lay and double side pull guide orientations,also install with tune-up devices for feeding table,its side-lay,plate cylinder.
4)Adopt independent ink system and dampening system,can adjust feeding freely,meet various different demands of printing matters,more suitable for color printing.
5)Presetting counter:automatically stop feeding paper once preset quantity task are completed.
6)Double detect device:detect double sheets and muiltply sheets,and automatically elimilate double and muiltiple sheets.
7)Sprayer device:make spraying and printing run in synchorienation,prevate printing paper from dirty.
8)More convinient for maintenance.
Main tyipical configuration:
(1)Pneumatic control
(2)Journaled front guide plate
(3)Feeding paper face height adjustment
(4)Sheet transfer plate with vacuum suction strip supplied by independent air source
(5)Side-automatic plate loader
(6)Pneumatic impression system
(7)Air compressor
(8)Air pump
(9)Operating panel step
(10)Sheet feed & delivery cart
Structure:
The parameters of number head
Max.quantity of head | 7*7=49(horiz-type head) |
5*8=40(verti-type head) | |
Min.perforate line distance | 25mm(blade assemble,cross perforation) |
5mm(saw blade type,vertical perforation) | |
Dycril plate size | 90*345mm(cylinder type) |
30*40mm(partial type) | |
Ink rollers of the NP unit | 6 ink rollers(2 form ink rollers) |
