DSP-1008T Three-stage,sloder paste printer
Minimum Order: 0
Quality/Safety Certification: 0.00
Three-stage,sloder paste printer
1.Precise Transport System
2.Automatic Stencil Cleaning System
3.High speed
Full automatic SMT stencil printer DSP-1008T:
three stage, the highest speed & automatic solder paster with vision
Full automatic SMT stencil printer DSP-1008T
technical parameters
Screen Frames | Min Size | 470X380mm |
Max Size | 737X737mm | |
Thickness | 25~40mm | |
PCB Min Size | 50X50mm | |
PCB Max Size | 400X340mm | |
PCB Thickness | 0.4~5mm | |
PCB Warpage | less than 1% | |
Transport Height | 900±40mm | |
Transport Direction | Left-Right;Right-Left;Left-Left;Right-Right | |
Transport Speed | Max 1500mm/S Programmable | |
Board Location | Support System | Magnetic Pin/Up-down table adjusted by hand |
Clamping System | side clamping,vacuum nozzle | |
Print head | Two independent motorised printheads | |
Squeegee Speed | 6~200mm/s | |
Squeegee Pressure | 0~15Kg | |
Squeegee Angle | 60°(Standard )/55°/45° | |
Squeegee Type | Stainless steel(Standard), plastic | |
Stencil Separation Speed | 0.1~20mm/sec Programmable | |
Cleaning System | Dry,Wet,Vacuum (Programmable) | |
Table Adjustment ranges | X:±4mm;Y:±6mm;θ:±2° | |
Repeat Position Accuracy | ±0.008mm | |
Printing Accuracy | 01005(±0.02mm) | |
Cycle Time | <6.5s (Exclude Printing & Cleaning) | |
Product Changeover | <5Min | |
Air Required | 4.5~6Kg/cm2 | |
Power Input | AC:220±10%,50/60HZ 1 3KW | |
Control Method | PC Control | |
Machine Dimensions | 1140(L)X1360(W)X1560(H)mm | |
Machine Weight | Approx:1000Kg |