80W LED Flood Light
1)Light Source: 1*80W LED
2)6400LM Epivalley LED Chip
3)Lifetime: 50,000Hrs;Warranty:2years
4)CE&RoHS

80W LED Flood Light,LED luminaire,LED Flood lamp

Listing Description:

1) Light Source: 1*80W    LED                              

2) Luminous Flux: 6400LM   Epivalley LED Chip                   

3) Rated Wattage:    95W   

4) Base: 2PINS           

5) Rated Voltage:  100-240VAC, 50/60Hz

6) Color Temperature:  WW(2700~3800K), NW(4000-5000K) or CW(5500-6700K)
7) Beam Angle:    150° 

8) Lifetime: 50,000Hours            

9)Size:  393*285*93mm                                                                                                                                      

10) Net weight: 5.31KGS/PCS                                                                               

11) CE ,ROHS approved                                                                                

12) Body Temperature:   <70 °C  @Ta=25 °C                                                                            

13) Recommended Replaced bulb: Metal Halide Lamp                                                                            

14)12-24VDC for solar power system is available
15)IP Rating:IP65
16)Silver Grey Shell is acquiescent; Black and White Shell(+0.9USD/PCS less than 50PCS) to be choosen

•Use single powerful LED (50W-80W) as the light source, with our own intellectual property rights for LED encapsulation. Utilize the special design of multichip single module. Choose the imported high brightness semiconductor chips. With the characters of high heat conductivity, low luminous decay, pure light color and no ghosting.

•The LED is closely connected to the crust. The heat from LED will be removed from the heatdissipation wing and also by the air cross-ventilation. It can ensure its life-span effectively.

•The lights were sealed by silicone rubber, it makes the heat sink, end cap and the glass combined perfectly with each other The surfaces were passed the treatment like anodic oxidation and plastic spraying. It can meet the requirement of IP65.

•Use the high pure imported aluminum from Germany as the reflector This kind of reflector has high reflecting efficiency, and it can make sure the luminous flux. The special design of our reflector can improve the light uniformity and utilization ratio. It can control the light inside of a useful area. The advantage of the LED streetlights like power saving can be revealed adequately.

•No delay start; No waiting. It can reach its normal light as soon as it is turned on. The switch can be used for hundreds of thousand times.

•It is safe and removable, and it can be positioned at any angle. It is universal, and it can be used in a large scale.

•Environment friendly and no air pollution. We exert the design of using cold light source. It’s no heat radiation. There is no ill to our eyes and skin. The floodlights do not have lead, hydrargyrum and any other contamination. It is a real environment friendly and saving power product.

•It’s an excellent partner of the solar panel system. It can exert many such as working with direct current and lower voltage. It is power saving and environment friendly. The connection of the solar panel and LED light source provide a high reliability

 

User Area:

Factories, gymnasiums, yards, advertising boards, buildings, lawns, garden designs and some other outdoor places where need spot lighting and lights decoration.