DF-16 from Dongyue Micronized ParticlePTFE Molding Powder ptfe granular
Minimum Order: 0
Quality/Safety Certification: 0.00
ptfe granular
1.packing:25kg/barrel
2.process:for molding
3.usage:electric source,making film,seal,gasket,club,panel,tube
PTFE molding powder DF-16
We supply PTFE moding powder, PTFE fine powder, PTFE aqueous dispersion made in DONGYUE.
If you need them ,please contact us.We sincerely welcome all customers all over the world.
No. | Item | DF-16 | |
Grade A | Qualified | ||
1 | Smoothness&clearness | white sheet surface,even texture,no metal residue quantity(0.5mm)2 | |
2 | Tensile strength(Mpa) | 29 | 27.4 |
3 | Elong.At Rupture | 300 | 280 |
4 | Volume Density(g/L) | 300-450 | |
5 | Residue on Sieve(65um) | 3 | |
6 | Moisture content | 0.04 | |
7 | Melting point | 327±5 | |
8 | Stand Relative Density | 2.130-2.160 | |
9 | Thermal Inst. Index | 20 | |
10 | Electric Strength(Kv/mm) | 60 | |
11 | For check | Executed According to requirment of HQ/T2903-1997 | |
12 | For process | For molding | |
13 | Usage | The resin are mainly used as insulating film for electric,the products of thin wall,seal,gasket,club,panel,tube,axletree,seal ring,and loop etc. | |
14 | Packing,storage,Transportation | 1.PTFE is packed in double layer PVC bags inside and in hard circular barrels outside. On the barrel,there should be attached label and quality certificate, on which there are brand,trademark,executive criterion,type,grade,lot No. and net content,pack date,checker and packer. 2.PTFE should be stored in clean dry warehouse to pervent from dust,moisture,etc,foreign matters. 3.The products are transported according to non-dangerous products.Heat,moisture,freezing and strong shock should be avoided during transportation.Over-bumpiness and compression is apt to make the resin bind together. |