ptfe resin
1.packing:25kg/barrel
2.usage:the resin is used to auto press malding and ram extrusion all kinds of rods,pipe etc.
We supply PTFE moding powder, PTFE fine powder, PTFE aqueous dispersion made in DONGYUE.
If you need them ,please contact us.We sincerely welcome all customers all over the world.
The resin is used to press molding and ram extrusion allkinds of rods,pipe etc.
Iten | DF-31B | ||
|
| Grade 1 | Qualified |
1 | Appearance & Cleaness | Test impurity quantity that equal or less than 1mm doesn't exceed two.
| Test plate is white and homogeneous,no metal impurity quantity ≤6impurity quantity (0.5-2mm)≤2.impurity quantity (2-3mm)≤1 |
2 | Tensile Strength,(Mpa)≥ | 20 | |
3 | Elong.At Rupture(%)≥ | 200 | |
4 | Volume Density,(g/L) | 800±100 | |
5 | Average Grain ( μ m) | 600±100 | |
6 | Moisture Content.(%)≤ | 0.04 | |
7 | Powder flow(g/min)≥ | 700 | |
8 | For fabrication | Auto press molding and ram extrusion | |
9 | usage | The resin is used to press molding and ram extrusion all kinds of rods,pipe etc. | |
10 | Packing,Storage Transporation | PTFE is packed in double layer PVC bags indide and in hard circular barrels outside,on the barrel,there should be attached label and quality certificate,on which there are brand,trademark,executive criterion.type,grade,lot NO.and net content,pack date, checker,,packager.
PTFE should be stored in clean dry warhouse to prevent from dust,moisture,etc,foreign matters.
The products are transported according to non-dangerous products,Heat,moisture,freezing and strong shock should be avoided during transportation.Over-bumpiness and compression is apt to make the resin bind together |