MCAM Magnetic Drive Pump
Size: 32~80
Capacity: Max. 11m3/h
Head: Max. 280m
Speed: 1450/2900r/min

MCAM Magnetic Drive Pump
Size: 32~80
Capacity: Max. 11m3/h
Head: Max. 280m
Speed: 1450/2900r/min
Operating Temperature: Max. +220°C
Pressure rating: 1.6Mpa and 2.5Mpa
Viscosity: Max. 100mm2/S
Power bound: Max. 132Kw General
Hermetically sealed pumps with magnetic coupling are characterized by a single-acting safety sleeve. The separation of liquid to the atmosphere is effected via the so-called containment shell. As it is the case with conventional centrifugal pumps with mechanical seal, a common standard motor is used which one is combined with the magnetic drive through a coupling for the drive of the pump. The outer rotor contains permanent magnets transferring the turning moment created by the motor via the containment shell to the inner rotor. Design
The constructional features of these pumps correspond to those of a multistage pump and consist of a permanent magnetic coupling as an integral part. The required output is transferred to the pump via a conventional standard three phase current motor of type B 3 or B 35 with the corresponding intermediate coupling.Application sector
For the delivery of aggressive, toxic, explosive, precious, inflammable and slightly volatile fuids.Application ranges
MCAMD: –40 °C to +220 °C *Magnetic drive
Thanks to the use of new types of permanent magnetic materials with high energy density, it is possible to house a powerful magnetic coupling within the pump bearing
support specified in the standard. The magnetic drive is equipped for direct activation when operated using standard three phase current motors and does not require any type of coupling. In addition, the permanent magnets are highly stable against demagnetising effects, such as those which may occur when assembling or disassembling the rotor or if the maximum transmittable torque is exceeded.