1.Submersible depth 10m
2.Head up to 52m
3.Flow rate up to 100L/min
4.Protection: IP 44
5.Ambient temperature up to +40degr
Range of Performance
Flow rate up to 100L/min(6m3/h)
Head up to 52m
Application and Installation
They are recommended for pumping clean water without abrasive particles and liquids that are chemically non-aggressive to the materials of which the pump is made.
They are suitable for delivering water in combination with small pressure sets, as well as for irrigation.
The pumps shall be installed in enclosed places, or at least protected against inclement weather.
Operating Conditions
Submersible depth 10m
Liquid temperature up to +40° C
Ambient temperature up to +40° C
Max.working pressure:6 bar
Structure Feature
Pump body: Cast iron or Stainless steel
Motor Bracket: Aluminum
Impeller: Brass or Plastic
Motor shaft: SS420 or CS45#
Mechanical seal: Ceramic - Graphite
Electric motor: Single-phase 220V - 50Hz with capacitor and thermal overload protector.
Voltage fluctuation for 10% more or less is allowed and other voltage for 60Hz is also available.
Insulation: Class B
Protection: IP 44
Performance Curve
Curve Parameters N=2850r/min