Melt Pumps for Extrusion
Prolonging extruder's service life
Efficienter than the extruder at building the pressure
Melt Pumps for Extrusion
Melt pump is mainly used in high temperature and high viscosity molten polymer transport, turbo, measurement. They are widely applied in plastic, resin, rubber extrusion, such as granulation, film, pipes, plate, etc.
Rotate speed: ≤60rpm(Adjustable)
Temperature: 400°C (max.)
Max.Outlet pressure: 350Bar
Max.Differential pressure: 275Bar
Heating method: Stainless Steel Cartridge Heater
Theoretical pumping capacities | ||||||||||
model | pump size | cc/rev | at 500 rev/h | at 750 rev/h | at 1000 rev/h | at 1500 rev/h | at 1800rev/h | at 2400 rev/h | at 3000 rev/h | |
ZB | 5CC | 5 | 2.5L/H | 3.75L/H | 5.0L/H | 7.5L/H | 9.0L/H | 12.0L/H | 15.0L/H | |
ZB | 10CC | 10 | 5.0L/H | 7.5L/H | 10.0L/H | 15.0L/H | 18.0L/H | 24.0L/H | 30.0L/H | |
ZB | 20CC | 20 | 10.0L/H | 15.0L/H | 20.0L/H | 30.0L/H | 36.0L/H | 48.0L/H | 60.0L/H | |
ZB | 31.5CC | 31.5 | 15.75L/H | 23.63L/H | 31.5L/H | 47.25L/H | 56.7L/H | 75.36L/H | 94.5L/H | |
ZB | 50CC | 50 | 25.0L/H | 37.5L/H | 50.0L/H | 75.0L/H | 90.0L/H | 120.0L/H | 150.0L/H | |
ZB | 100CC | 100 | 50.0L/H | 75.0L/H | 100.0L/H | 150.0L/H | 180.0L/H | 240.0L/H | 300.0L/H |
The operating limits are dependant on the service conditions. Please contact Batte for specific applications.
The real density and viscosity of the material should be considered.
Please contact us for more pumps' specification..