AMH pump is designed for CIP with emphasis on large internal rounding and cleanable seals, owning steel shroud to protect motor.
Applications:
AMH pump is a highly efficient and economical centrifugal pump,which meets the requirements of sanitary and gentle products treatment and chemical resistance.AMH is available in nine Sizes:AMH-5,-10,-15,-20,-25,-30,-35,40,-45.
Standard design:
AMh pump consists of a standard motor,stub shaft,mechanical compression coupling,adaptor,back plate,impeller,pump casing and shaft seal. It is designed for CIP with emphasis on large internal roundings and cleanable seals.The sanitary version of AMH has a stainless steel shroud for protection of the motor,and the complete unit is supported on four adjustale stainless steel legs.
Shaft seals:
AMH pump is equiped with either an external single or a flushed shaft seal.Both have stationary seal rings in acid resistant steel AISI 316Lwith sealing surface in silicon carbide and rotating seal rings in carbon.The secondary seal of the flushed seal is a long lasting lip seal.The pump may also be equiped with a double mechanical shaft seal.
Material: AISI304, AISI316L (body made of acid-proof stainless steel)
Specification: 3T/0.75kw-80T/18.5kw
Impeller type: Open, Close
Connection: Union, Clamp, male
Motor: ABB
Flushed shaft seal(AMH-5 TO AMH-45):
Water pressure inlet:Max.1 bar
Water consumption:0.25-0.5L/min
Double mechanical shaft deal:
Water pressure inlet,AMH-5 to AMH-45:Max.500kPa(5 bar)
Water cosumption:0.25-0.5L/min
Connection for FSS and DMSS:
R1/8''(BSP)external threead
Motor
Foot-flanged motor according to the IEC metric standard,2 poles=3000 rpm at 50 Hz,IP 55,insulation class F.
Voltage and Frequency:
3~,50 Hz,220-240V Δ/380-420VY≤4kw
3~,50 Hz,380-420V Δ/660-690VY≤4kw
Motor Size
50Hz:0.75-1.1-1.5-2.2-3-4-5.5-7.5-11-15-18.5-22kw
Please Flow chart and AMH series pump and motor configuration as bellow:
We are specialized in producing different kinds of sanitary pumps. We supply a wide range of specifications. OEM is welcomed.
