Welcome to B2BAGE
BWS-200/10 Mud Pump
BWS-200/10 Mud Pump

Minimum Order: 0
Quality/Safety Certification: 0.00


Mud pump widely used in the field of geologic engineering, oil, mining, metallurgical, chemical and water conservancy industriiy

BWS200/10 pump is not only transport clearwater and grout , but also transport mortar which is blow 5 mm. the grouter pumps which mainly used toproceed pressure injection and injection to earth dam, gypsum earth dam ofreservoir and stream-way for indurating their fracture, ravelly ground, fluidhole to prevent dam base from percolating, and which also used deliver mixedmortar including lime slurry, cement paste, paste, clay mortar, cement mortarand so on. This pump also is used in the kilometer of core drillings

 

1. This pump are sealing up position each mainly to adopt angle sealedstructural technology extensively , are sealed and reliable , have simpletechnology , pack to take apart convenience;

2. Entered drain the adopting of valve base is mounted hard alloy, valveadopting spring ball valve, hardness altitude, wear-resisting, impulsewithstand, pack to take apart convenience, service life is long;

3.The big ship of leather belt left put diameter to increase , powerchange convenience and easy;

4. The safe valve adopt diaphragm type;

5. The double-disk clutch have little adhesion , it is also reliable tooperate to be easy;

6. force plunger are sealed up add together water ring, make sealing upreliable, since washing cooling force plunger and the dirt on force plunger intime, make force plunger more durable.

7. It can be transported mud, and also transport mortar.

 

 

BWS-200/10 MUD PUMP   Specs

Type

Horizontal, triplex, reciprocating, single acting plunger pump

Stroke

100mm

Liner dia

Φ65

Pump speed (min)

201,151,101,77

Output volume (l.p.m)

200,150,100,75

       Discharge pressure (Mpa)

5.0,6.5,10.0,10.0

Transport medium size

< 3

     Transport medium Max. size

< 7   Content is less than 5%

Water: Ash: Sand limit density

1:2:4

Input speed of pump (r.p.m)

500

Max. suction head (m)

2.5

Inside diameter of suction hose (mm)

Φ76

   Inside diameter of discharge  (mm)

Φ51

Dimensionsmm

1660×920×867

              Weight (kg)

940 (Including electromotor)

 

Ads by Google



About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 B2BAGE Limited and/or its subsidiaries and licensors. All rights reserved.