FX-2025 automatic drill press machinery
max diameter of drilling:10mm
Main Parameter for specification
FX-2025 automatic drill press machinery | |
The automatic lathe turning can be used for proccessing of electrony,equipment,computer box and all kinds of components | |
munber fo tool | 5 |
tool unithead | 2 |
no.1 tool max length of processing | 35mm |
no.5 tool max length of processing | 30mm |
max diameter of drilling | 10mm |
cam shaft spead | 2370-7400rpm |
weight | 750kg |
Machine Maintenance Chapter
|
1.Principal Axis Section:Machine should be cleaned every-day accompanishing its job, Iron filings attached on the Principal Axis should be blew off using the air-gun,when blowing iron filings, must be perpendicular comapring with the Axis,which prevent iron filings blowing into inner Principal Axis,further shortening worklife of Principal Axis. ATTENTION!
|
2.Chuck Section:Machine should be cleaned every-day accompanishing its job, making iron filings attached on Chuck(Inner Bore)cleaned by air-gun , then adding lubricating oil appropriate.
|
3.Slide Rail Section:Inject located by the right side for the machine , must pull it for three or four times everyday,to enhance slide rail better lubricating ,Oil slide in the Inject's inner oil chamber should be added new oil slide after using exhausted , Afore adding new oil slide, keep vent valve 's back off opening up , that is for absolute cleaning inner storing fee-oil , then adding new oil slide ,for the specification is 'Mobi11405'.
|
4.Leather Belt Section:Wiping the leather-belt by cleaning cloth every two or three days , which prevent the belt pasting iron filings ,leading the influence for the Principal Axis' normal revolve,and worklife of the convey of wheel.
|
5.Electronic Control Section:Make sure the Electronic Control Box being closed in the working hours , preventing the dust coming in ,again installing the flushing device need to be high attentioned.for the coolant oil pouring into the Box inside.
|
6.Except point to the above-mentioned Cleaning and Maintenance , Adding anti-rust oil for all parts of Machine after ever-day cleaned, Done it thorough-going of dealing with matter for the anti-rust .which can extend worklife for the Machine.
|