Welcome to B2BAGE
eoc--wireless slave with two Eth, voip and wifi
eoc--wireless slave with two Eth, voip and wifi

Minimum Order: 0
Quality/Safety Certification: 0.00


It can seperat the signals of Ethernet and CATV and has VOIP and WIFI functions.

Name: EOC--wireless slave  

1) The equipment has two Eth ports, one tv signal, one VOIP,WIFI

2) The equipment can only install VOIP or WIFI, and also simultaneously has both VOIP and WIFI functions.

VOIP:

Communication
Protocol

SIP(RFC3261),SDP(RFC2327),RTP / RTCP

Voice Code

G.711A/U,G.723.1,G.729A/G.729AB

Voice enhancement characteristic

G.165,G.168  echo counter-balance
Dynamic Jitter Buffer, VAD, CNG, Packet-loss compensation

Network characteristic

Various network access method(static IP, DHCP, PPPOE)
Support server to adopt DNS
Support NAT

The advanced router

DHCP server, DMZ

DTMF

Inband Audio,  Outband over RTP(RFC2833),
Outband over SIP Info

Configuration management

WEB configuration management and software upgrading
Quick configuration navigation

Network Interface

Wan port: one, 10/100M auto-adaptive fast  speed Ethernet port

Lan port: three, 10/100M auto-adaptive fast speed Ethernet port

Wan port: one, 10/100M auto-adaptive fast  speed Ethernet port

Lan port: three, 10/100M auto-adaptive fast speed Ethernet port
WLAN: built-in, support 801.11B/G, support WEP/WPA coverage, 100 meters indoor, 300 meters outdoor

Wan port: one, 10/100M auto-adaptive fast  speed Ethernet port

Lan port: one, 10/100M auto-adaptive fast speed Ethernet port

Vlan

802.1Q VLAN  802.1P

Analog Interface

1 FXS port

2 FXS ports

QoS

802.1Q VLAN
802.1p Priority
IP TOS

Power

AC adapter: 100~240V AC, 48-60Hz
Input: DC 12V

Consumption

< 5W

Environmental Conditions

Operational temperature: 0~40°C
Storage temperature: -10°C~60°C
Humidity: 10~95%, no coagulation

 

WIFI:

Features:

1) Accord with standards IEEE 802.11b,IEEE 802.11g,IEEE802.11n draft v2.0,IEEE 802.3 and IEEE 802.3u

2) Support the protocols CSMA/CA,CSMA/CD,TCP/IP,PPPoE,DHCP,ICMP,NAT

3) Provide one 10/100M auto-adaptive Ethernet port,can be connected to ADSL or Ethernet switch/router or other terminal Ethernet equipment.

4) Support auto MDI/MDIX

11n supports 135/121.5/108/81/54/40.5/27/13.5Mbps

130/117/104/78/52/39/26/13Mbps

65/58.5/52/39/26/19.5/13/6.5Mbps

11g supports 54/48/36/24/18/12/9/6M rate auto-adaptive

11b supports 11/5.5/2/1M rate auto-adaptive

5) Support 64/128 bit WEP encryption;Support WPA, WPA2, IEEE 802.11i, TKIP, etc. encryption and safety system

6) Support SSID broadcast control and access control based on MAC address

7)T he built-in DHCP server,simultaneously assign the static state address

8) Built-in SPI’s NAT firewall, support to filter PING, broadcast,multicast package and filter the content of MAC address, P address, URL and domain name

9)Support the static state router

10) VPN support:PPTP/IPSec/L2TP pass-through

11) Be able to prevent DoS attack, and could automatically isolate the virus

12) Support to modify and clone MAC address

13) Support the distant and Web management, the Chinese interface, provide the simple and easy installation guide(Wizard)

14)AP module can be set four work modes: bridge, gateway, transparently transmit Ethernet to wifi, the customer end, it meets network requirement under the various environments.

 

 

 

Ads by Google



About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 B2BAGE Limited and/or its subsidiaries and licensors. All rights reserved.