it is a kind of self-adhesive and reflective road marking tapes,warmly welcome to contact me for more information.

Use&Features:

1.L5011X  it’s self-adhesive, primer needs to brush coating on pavement surface before installation.

2.The products are permanent marking tape, with micro glass beads both on surface & in base materials, has a durable, reflective & antiskid effect.

3.it is applicable to various pavement surfaces: concrete, asphalt, marble etc.

4.the permanent marking tape is excellent product for creating crosswalks, road lines, arrows, words, symbols, preformed pavement markings, logos, 3D markings, pipe marker label etc.

Life:

2 years but depends on the road conditions, traffic flow and proper installation

Specification:

standard length: 40 meter; standard width: 100cm(we can cut according to your requirements, such as 10cm, 15cm), thickness: 1.6-2.2mm.

(2)Ways of Installation:

1. The pavement surface must be clean, dry and even.
2.  Installation after the pavement dry completely more than 24 hours at least.
3. Tools: traffic cone, broom, slate pencil, adhesive, rubber hammer, roller, knife, tape measure.
4. Clean the floor.
5. Draw the outline of pavement marking tape.
6. Stiring the adhesive equably.
7. Brush the adhesive on the floor and requiring the thickness moderate adhesive is equably.
8. Brushed adhesive out of the signs outline 1cm.
9. The sign can be pasted when the adhesive is half dried and not move to the skin.
10. Peel off the signs backing paper and paste it follow the outline.
11. Traffic will be ok after 20 minutes.
12. Avoid tearing and peering off it by force within 24 hours.

Packing:

Carton /Woven Bag /Wooden Pallet packing

Photos: