Specification of CHVL Series Condensing Unit
1. The refrigerant charge must be controlled strictly.
CHVL Series Condensing Unit
Specification of CHVL Series Condensing Unit | |||||||
Model | CHVL-13E | CHVL-16E | CHVL-23E | CHVL-29E | CHVL-41E | ||
Nominal Input (w) | 700 | 900 | 1200 | 1400 | 2100 | ||
power Supply | 220V/50Hz | ||||||
refrigerant(max. limit kg) | R22(1.2) | R22(1.5) | R22(2.0) | R22(2.5) | R22(3.5) | ||
start-up current (A) | 22 | 27 | 38 | 42 | 66 | ||
Max. Load Current (A) | 4 | 5.1 | 6.5 | 7.7 | 11.2 | ||
Evaporating Temp. | -40 ~ -5 | ||||||
Ambient Temp. | 0 ~ 40 | ||||||
Model of Compressor | HRVL-13E | HRVL-16E | HRVL-21E | HRVL-29E | HRVL-41E | ||
Condenser | Style | Fin Tubes | |||||
Fan motor | (mm) | 300 | 300 | 300 | 350 | 400 | |
Diameter of Fan | |||||||
Air Flow | 1300 | 1530 | 1530 | 1800 | 3000 | ||
(m 3 /hr) | |||||||
Pipe mm | Gas Inlet | 12.7 | 15.88 | ||||
Liquid Outlet | 9.52 | ||||||
Outline Dimension | Length(mm) | 560 | 580 | 610 | 630 | ||
Width(mm) | 470 | 580 | 540 | 610 | |||
Height(mm) | 365 | 445 | 545 | ||||
Refrigeration Capacity | Evaporating Temp.() | Refrigeration Capacity W ( Kcal/h ) | |||||
Condensing Temp.: 45 Ambient Temp.: 32 | |||||||
-40 | 410(355) | 505(434) | 670(580) | 845(730) | 1350(1160) | ||
-35 | 532(458) | 650(560) | 820(709) | 1033(893) | 1684(1444) | ||
-30 | 656(563) | 800(688) | 1005(870) | 1266(1096) | 2080(1785) | ||
-25 | 793(682) | 969(833) | 1240(1070) | 1562(1348) | 2550(2190 ) | ||
-20 | 969(833) | 1183(1017) | 1500(1295) | 1845(1593) | 3100(2670) | ||
-15 | 1164(1000) | 1421(1223) | 1840(1590) | 2263(1956) | 3740(3210) | ||
-10 | 1416(1217) | 1728(1486) | 2125(1825) | 2614(2245) | 4490(3860) | ||
-5 | 1672(1438) | 2042(1756) | 2440(2095) | 3010(2577) | 5350(4600) | ||
Wiring Capacity | Leakage Protector | Rated Current | 10 | 15 | 20 | ||
( A ) | |||||||
Leakage Current | 30 | ||||||
( mA ) | |||||||
Wire Diameter | Within 10m | 2 | |||||
Within 20m | 2 | 2.5 | |||||
(mm 2 ) | Within 30m | 2 | 2.5 | ||||
Notes | |||||||
1. The refrigerant charge must be controlled strictly. The Maximize limitation of charging is listed in the table. 2. Diameter of the suction and evaporating pipes should be decided by oil circulation and reconfirmation of gas speed. 3. The diameter of pipes must guarantee the gas speed of 3.8m /s through horizontal pipes and 7.6m /s through vertical ones. 4. The single sided pipe length is 10m; with height difference should be within 3m. |