CHSW-LHSW industrial air coolers low noise operation and reduced energy consumption
Main features
Fin spacing: 4.5 mm – 6 mm – 7.5 mm – 10 mm – 12 mm
From 1 to 6 fans, Ø 450 – 500 – 630 - 800 mm
Low noise operation and reduced energy consumption
784 models from 5 to 162 kW
Heat exchanger
The TURBOCOOLER® high-efficiency heat exchangers which characterise this range of air coolers have new inner-grooved copper tubes specially designed for water-glycol and new Turbofin 3 and Turbofin 4 aluminium fins.
Fin spacing and best use
Range 4 – 4.5 mm: conservation at positive temperature
Range 6 – 6,0 mm: conservation at positive temperature
Range 7 – 7.5 mm: conservation at negative temperature
Range 10 - 10 mm: freezing and conservation at negative temperature
Range 12 - 12 mm: freezing
DEFROST
N = air defrost (TC> 2°C)
E = electric defrost (TC> -35°C)
SB = water spray defrost (TC> -2°C)
G = hot gas defrost for coil and electric defrost in the drain tray (TC> -35°C)
GB = hot gas defrost for coil and drain tray (TC> -35°C)
CASING
Galvanized steel casing with corrosion-resistent powder coating finish
Special Versions
ALUPAINT® fins in painted aluminium
CU fins in copper
Insulated drain tray
Stainless steel casing
Note
The air cooler catalogues refer to the corresponding unit cooler series. Some characteristics are different, such as the diameter of the connection. It is possible to visualise the details of every product and to calculate it in working conditions by using the REFRIGER software.