1.3 ways lighting wireless remote control switch
2.with control distance up to 50meters
1. Item No:WK-035AM
2. Working radio frequency: 433.92MHz/315MHz
3. Input Voltage: 110V/60Hz;220V/50Hz
4. Standby power: 0.67W-1.5W
5. Output Power(per way): energy saving lamp:150W
incandescent lamp: 600W
6. Operating Range: <=50 metres(open area)
7. Working Temperature:-20°~50°
8. Dimensions of the figure: Receiver:68*40*21mm;
Transmitter:58*38.4*13.1mm
9. QTY:60pcs
10. Main Features:
(1) three Ways Wireless control the lighting.for this product all the groups can control independently.with chief on/off,subsection by manual operation
(2)Fast, easy installation
(3)Wireless control 1 sets of lights.
(4)1 x 23A battery (included) for the remote control switch
(5)Remote control range less than or equal 50m
(6)For AC 220V or 110V.
11.Introductions:
(1)Remote control lights with the simple push of a button!
Ainside digital anti-interference system and 1/100000 passwordcode can effectively prevent lighting automatically by mistake due to interference by extermal signal.
(2)Plug your lamp into the receiver. Delicate transmitter,there is 23A12Vbattery inside transmitter.The battery‘s life is up to one year with20 times presses a day.(Please replace the battery when you find the lamps get darker or the remote control range get shorter)
(3)A quick push of the button will turn lamp on and off.
(4)Just plug Receiver intall into the lamp.
(5)Controller must match Receiver frequency.
(6)Ideal for children
(7)Delicate receiver,easy and conveniently to install,apply for various lighting fixtures and small power appliance.(look at the Instructions as below):K is a wall switch!
12. Installation and using notices
(1)Please check the electronic wire which connected with the lighting whether short circuit or breakdown when installation
(2)Please check which is connection line,search details on the outside of the cover of the products.
(3)All the products are work well before ex works,do not open the cover and make some changes,if the remote control distance shorten,please change the battery(12V23A)
(4)Please cut off the power when happen abnormal phenomenon in using process.
Remark:The output Power shown as above is working by220V;it will be half when the input voltage is 110V
