Wireless smart home parts: Remote control switch
1.30S /10-60M delay
2.For light/Home appliance/smart home
3.4 routes 220VAC
Model No.: DL-CS4016LT
Description:Wireless smart home parts: Remote control switch
Product Detail:
DL-CS4016LT is a 4 CH learning code intelligent RF controller with power supply of 220V AC. It is widely applied in the field of home appliance, super market, hotel, enterprise etc. It will bring you more convenience for your daily life.
1. Technical specification:
Operating voltage: | 220VAC |
Operating frequency: | 315MHz, 433.92MHz, customized frequency available |
Control mode: | Toggle |
No. of relay: | 4 channels |
Decode: | Learning code |
Range: | 10 m indoor(wall penetration), 30m in the free open area |
Learn remote: | 10 remotes(10 remotes work with one receiver) |
Button: | 8 buttons(1, 2, 3, 4, off/on, 30s, 10+min, 60 min) |
2. Function description:
3. Code learning and removing:
Method 1: short press the learn button on the receiver one time, there is a “bi” on the receiver, means it is now in the learning status. Now press any button on the transmitter, there will be “bi, bi” on the receiver, means the code has been learnt successfully. If there is no any signal received after the learning voice of “bi”, the receiver will automatically exit the learning status.
Method 2: Continuously turn on and off the power supplier of the receiver for 5 times at the interval of 1 to 3 seconds, when there is “bi” on the receiver, it will enter the learning status. The learning method is the same as method 1.
Remove the code: Long press the learning button on the receiver until there is “bi, bi, bi”, means the code has been removed.
4. Wiring diagram:
