remote control for home appliances
1. 3 seconds to 5 minutes adjustable separately
2. time lapse
3. DC12V/24V(220V available)
Model No.: DL-CS2013LT
Description: time delay remote control for home appliances
1. Product Detail:
DL-CS2013LT is a 2CH RF Wireless intelligent Remote Control Switch with time lapse (3 seconds to 5 minutes adjustable separately ) function at momentary control mode. It is widely used in electrical operated gate, window, crane devices, barrier, lifter, industrial control and security industry etc (especially for the switch over from wire garage, window and anti-theft system to wireless one)
2. Technical specification:
| Description | Parameter |
1 | Operating Voltage | 12V/24V DC |
2 | Control voltage and current: | 7A 240VAC | 10A 24VDC |
3 | Static Current | =< 6mA |
4 | Frequency | 433 MHz |
5 | Sensitivity | >= -105 dB |
6 | Output voltage | Optional DC / AC |
7 | Operating Temperature | -40 to 80 deg C |
8 | Decode IC | MCU(decode fixed code & learning code) |
9 | Time lapse | 3 seconds to 5 minutes adjustable separately |
10 | Dimension (w, h, d) | Case: 79*57*35mm |
11 | G.W.(set) | 130g |
3. Procedure to Learn and Erase Codes
a) Keep pressing the learn button until the led blink and extinguish, which indicates previous learned codes have been erased.
b) After erasing the code, the led will flash slowly, press the “Learn” button on the receiver board when the led is off, keep pressing until the led is on, then release, indicating the receiver is ready and waiting to learn from transmitter.
c) Press the remote, the led will blink, that means the code has been learnt..
4. Operating details:
Output Mode selection.
| J2 | J1 | Output Mode |
i | Open | short | Toggle |
ii | open | open | Momentary |
iii | short | Open | Interlock |
5. Wiring diagram:
6. Packing:
