DC12V controller
1. Output Power: 180W
2. Input Voltage: DC12V
3. Output Current: 5A per channel
4. Size: 8.3"*1.6"*1"
DC12V controller
Product Attributes
| DC input voltage | 12V |
| Output power | 5A(Max)per channel, 12V:180W |
| Size | 211(L)X40(W)X30(H)mm |
| Remote distance | 50 meters |
| Weight | 310G |
Product Speciality:
1. Under the control of wireless, the effective remote control distance is 50 meters.
2. 3 channel RGB control, the max current of each channel up to 5A.
3. Multi-Mode to select,with Pause function.
4. Mode,suspend power memory function.
5. 8 levels brightness adjustment.
6. 8 levels of speed adjustment.
Dimension
Change Mode Instruchion
| Mode Name | Mode Description |
| M1 | Up slowly dimming |
| M2 | Leaning Color Fade |
| M3 | Full Color Fade |
| M4 | Seven Color Flash |
| M5 | M2-M4 Loop |
Operation Instruction
The Functions of the buttons:
A Mode; B Pause; C Speed up; D Speed down
A Mode: Press it to change the mode to the next one;
B Pause: Press it to make the LED stays at the present color, press it again then the color change moves on;
C Speed up: Press it to make the change speed of the LED to a faster level(Default is fastest level);
D Speed down: Press it to make the change speed of the LED to a slower level.
Wiring Instruction
Remark:
Can control various single color modules and RGB modules with the common anode.
Don't control several CT308-RFs with one remote controller at the same time.
Contents about install
1. The input voltage should be limited in rated range.
2. Do not use it by over load.
3. Installed in suited environment.
4. If the load line was too long,you should link it like a ring as below.
5. The all load must be the module with the common anode.
Troubleshooting Guide
| Problem | Reason | Solution |
| 1. All the lamps were off | **The power wire not connected well or no **Lamp's power wire not connected well | **Reconnect the power wire or change a power supply **Reconnect the power wire |
| 2. Some color was off | Wire of this color not connected well | Reconnect the power wire |
| 3. Irregular flicker | Line is too long or not connected well | Shorten the line or add a amplifier |
**Packing: 1pc/inner box,strong carton,or as your request
**MOQ: 1pcs
**Delevery: Within 15days after receiving the deposit.
**Client requirements is warmly welcomed
Hope for your soon reply!
