1. Built-in duplexer and power supply
2. Powr output : 7-8W
3. Cover around 15km radius
3. Can use to be a mobile repeater
Smart repeater with built-in duplexer VHF/UHF power supply BF-3000
Features:
1. High/Low power output
2. CTCSS/DCS
3. PC programming
4. Time-out timer(TOT)
5. Multi-working mode
6. Extra encrypted board
7. Scanning
8. Relay delay
General | |
Frequency range | VHF:140-160,150-170MHz UHF:400-420,410-430,430-450,450-470,470-490,490-510MHz |
Channels | VHF 99CH/UHF 64CH |
Channel spacing | 25 KHz(width) /12.5 KHz(narrow) |
Antenna impedance | 50Ω |
Voltage | 13.8V DC,cathode grounded |
Current | < 3A |
Operating temperature | -30°C—+60°C |
Dimension | 183(L)×230(W)×65(H)MM |
Weight | 4kgs |
ransmitter | |
Power output | ≤10W |
Frequency stability | ≤±2.5ppm |
Modulation mode | 16KΦF3E(width)/8KΦF3E(narrow) |
Max frequency deviation | ≤±5KHz(width) /2.5KHz(narrow) |
Audio distortion | ≤3% |
Audio response | +1/-3dB |
Adjacent channel power | ≥70dB |
Spurious RF components | ≤-70dB |
Bandwidth | 20MHz |
Receiver | |
Sensitivity(at 12dB SINARD) | ≤0.25µV |
Frequency stability | ≤±2.5ppm |
Co-channel suppression | ≥-7 dB |
Adjacent channel selectivity | ≥70dB |
Intermodulation rejection | ≥65dB |
Spurious response rejection | ≥65dB |
Block | ≥90dB |
Audio output power | 1W (8Ω) |
Audio response | +1/-3dB |
Audio distortion @ Rated audio | ≤3% |
Bandwidth | 20MHz |
Notice: Product design and specifications are subject to change without previous notice.