band selective repeater
1.Frequency:1M~25M
2.Output power:10~23dBm
3.Gain:50~70dBi
4.Customized band selective
band selective repeater
When you are located in:
1. The underground area like: parking, tunnel, stroes, etc.
2. High office buildings, middle floor
3. Remote districts as: countryside, camping etc.
Your cell phone may get low signal due to:
1. Building shielding effect
2. Shortage of the base station covering
3. Shadow effect of wireless
All you need is a mobile signal repeater and your cell phone communication gets back to normal!
Repeater periodic antenna
4 way power splitter indoor antenna
Repeater Application
To expand signal coverage of signal blind areas where signal is weak or unavailable.
1. Small building indoor covertage
2. Hign building covertage
3. Tunnel covertage
4. Subway covertage
5. Vehical covertage
Repeater technical specification
Technical Specification | ||
Frequency range | 1M-25M | |
| Band selective repeater | |
Type | BOD20-1G-S | |
Output power | 10-23 | |
About Coverage | ||
About indoor antenna | ||
Gain(±1dB) | uplink | 50-70 |
downlink | 55-75 | |
Noise Figure | ≤6dB | |
In-band Ripple | ≤3-5dB | |
Group Delay | ≤5μs | |
ALC Range | ≥ 20dB | |
VSWR | ≤1.5-1.8 | |
Inter-modulation | ≤-45dBc/3kHz | |
Spurious Emission | like as | |
Out-band Spurious | ≥ +50dB @ 1 MHz |
Other Specification | |
Impedance | 50Ω |
Connector | N-Female |
Dimensions | 240×120×30mm |