Road Roller YZ12H with Rexroth
Minimum Order: 0
Quality/Safety Certification: 0.00
12000KGS operation weight,Popular using for road construction.
CE,CUMMINS ENGINE,EIII
12ton-20tons,CAT,ZF,SDLG,XCMG,LIUGONG
Specifications of Road Roller YZ12H with Rexroth :
Overall Dimension | |||
1 | Length | 6000mm | |
2 | Width(to outside of wheels) | 2300mm | |
3 | Height(To the top of the cab) | 3055mm | |
4 | Wheel base | 2945mm | |
5 | Tread | 1560mm | |
6 | Min. ground clearance | 395mm | |
Main Technical Specification | |||
1 | Static line force | 300N/cm | |
2 | Dynamic line force | 1174 N/cm | |
3 | Operating weight | 12000kg | |
4 | Nominal Amplitude –high –low | 1.75mm 0.85mm | |
5 | Centrifugal-Force –high –low | 250kN 125kN | |
6 | Total stress force | 31500(kg) | |
7 | Static Weight at Drum | 6500kg | |
8 | Static Weight at Tires | 5500kg | |
9 | Frequency | 32Hz | |
10 | Min. turning radius(Outside of rear wheel) | 5880mm | |
11 | Drum diameter | 1530mm | |
12 | Drum width | 2130mm | |
13 | Drum thickness | 25mm | |
14 | Traveling speed(Km/h) | ||
Stepless transmission | 0~12.1 | ||
15 | Gradient capacity | 20% | |
Diesel engine | |||
1 | Model | Dongfeng Cummins engine 6BT5.9-C150 | |
2 | Type | Direct injection. Turbocharged. Water cooling | |
3 | Rated output | 110 kW | |
4 | Bore and stroke | 102X120mm | |
5 | Total exhaust of cylinder | 5.9 (L) | |
6 | Rated speed | 2200(r/min) | |
7 | Max. Torque | 580(N.M) | |
8 | Starting type | Electric | |
9 | Min. specific fuel consumption | 229(g/Kw.h) | |
10 | Net weight | 430(kg) | |
Driving System | |||
1 | Model | Static Hydraulic stepless driving | |
2 | Type | Drive pump +drive motor + reducer | |
3 | Model of drive pump | A4VG90HWDL1/32R | |
4 | Model of drive motor | AA2FM80/61W | |
5 | System pressure | 40MPa | |
6 | Type of reducer | Spur gear parallel shaft constant-mesh | |
7 | Gear ratio of reducer | 2.94 | |
Axle and Tire | |||
1 | Type of main reducer | spiral bevel gear, single stage | |
2 | Gear ratio of main reducer | 3.889 | |
3 | Type of final reducer | Single stage planetary | |
4 | Gear of ratio of final reducer | 4.941 | |
5 | Gear ratios | 19.2155 | |
6 | Size of tire | 23.1-26-12PR | |
Working Device Hydraulic System | |||
1 | Model of tandem pump(vibrating +steering) | HP051B498BIJM20-7BRAB06-1 | |
2 | Vibrating hydraulic system pressure | 160(kgf/cm2) | |
3 | Model of oil motor | HM051A878BEP020-7 | |
4 | Solenoid vibratory valve | ZF250B | |
Steering System | |||
1 | Type | Middle articulated frame. Full-hydraulic Steering | |
3 | Model of redirector | BZZ1-E500C | |
4 | System pressure | 12MPa | |
5 | Dimension of steering cylinder | 90*45*280(mm) | |
Brake System | |||
1 | Type of traveling brake | Single chamber brake valve Caplier disc brake Air over oil activate rear axle | |
2 | Air pressure | 6-8(kgf/cm2) | |
3 | Type of parking brake | Hand brake Flexible shaft control clamp brake | |
Oil Capacity | |||
1 | Fuel(diesel) | 250 (L) | |
2 | Engine lubricating oil | 15 (L) | |
3 | Oil for gear box | 2.2(L) | |
4 | Oil for hydraulic system | 200 (L) | |
5 | driving axles(R) | Oil for main reducer | 18(L) |
Oil for final reducer | 2X3(L) | ||
6 | Oil for brake system | 1.5( L) | |
7 | Oil for vibrating drum | 2X37.5(L) |