1.material:80x80-100x100mm
2.output:8-32mm round bar or rebar
3.capacity:30000-40000t/year

Product usage: rolling copper, aluminum etc. alloy plates

Structural features: this machine is 2hi closed irreversible mill,, including the mill body, herring bone gearbox, reducer, screw down structure, etc.

There are 2 types : electrical screw down and hand screw down, you can choose any of them.

The machine including: main motor, screw down motor, reducer, herring bone gearbox,etc.

1.Outline

rolled material: Carbon steel, stainless steel and low alloy steel

Raw material specs  100x100×1500

End products  : 8-20 mm deformed bar    

2.Main equipments

This set of equipment is consisted of 3 3hi roller mills and a 2hi roller mill,  and  a deceleration machineZD100, 300 gear transmission part a standby nylon rods pin shaft coupling, three sets of sleeves, fly wheel: a set, electric equipment, a suit of lubrication device (other: roller and cooling bed , according to the specific product factory and supporting drawings or equipment)

3. equipment technical parameters:

1 main motor: 480kw~630kw according to your choice

2 coupling using elastic dowel pin shaft coupling: 2 sets of ZL11 # , a set of  1 ZL13#

3. Fly wheel 1600 mm in diameter,  material: ZG340-640

4. 4 ZD100 reducer: center distance A = 1000 mm Speed ratio I =  3.93

Big gear material ZG340-640 high gear shaft 40Cr forging

5. 300 words gear box: center distanceA = 300 mm center distance 40Cr shaft gear forging

Allow the maximum torque: 8 tons / m

6 300x 4roller mill : 3 sets of 3 hi  roller mill roll and a 2 hi roller mill

 1.first roller diameter    280~ 320 mm   long  900 mm   material: roll steel roller

 2.Second and third roller machine diameter: 280 ~ 320 mm long 750 mm material: roll cold hard chromium molybdenum infinite