cold-proof rubber belt
1.Varies in types
2.Good wearing resistance
3.Sample is available
4.stardard part in low price
cold-proof rubber belt
We can offer high quality conveyor belts to clients, the extensive product range include: EP conveyor belt, Multi-plied textile belt and all kinds of V-belt. You can choose the parameter of each term in the above table as you need.And if you have some special demand,please contact us,we may provide you .There are all kinds different products than can be applied in coal mining, steel works, harbor, power plants, cement, chemical and food industry.
1) Advantage: Polyester carcass, thin belt body, lightweight, high tensile strength, fatigue resistance, impact resistance, excellent trough ability, low elongation and long life
2) Use: Mainly used in harsh conveying occasions of medium or long-distance, heavy-load, high speed and humid environment.
| Fabric specs | Strength series (N/mm) | Cover thickness | Width | Length | |||||
2ply | 3ply | 4ply | 5ply | 6ply | Upper | Bottom | mm | m | ||
EP | EP80 | 160 | 240 | 320 | 400 | 480 | 4.5~10 | 0~4.5 | 400~1800 | ≤300 |
EP100 | 200 | 300 | 400 | 500 | 600 | |||||
EP150 | 300 | 450 | 600 | 750 | 900 | |||||
EP200 | 400 | 600 | 800 | 1000 | 1200 | |||||
EP250 | 500 | 750 | 1000 | 1250 | 1500 | |||||
EP300 | 600 | 900 | 1200 | 1500 | 1800 | |||||
EP400 | 800 | 1200 | 1600 | 2000 | 2400 | |||||
EP500 | 1000 | 1500 | 2000 | 2500 | 3000 |
Index | Model | ||||
Model I | Model II | Model III | Model IV | ||
Variation range | |||||
Hardness | Difference after and before aging (IRHD) | 20 | ±20 | ±20 | |
Maximum after aging (IRHD) | 85 | ||||
Tensile strength | Decrease of performance variance rate %≤ | -25 | -30 | -40 | -40 |
Maximum after aging Mpa | 12 | 10 | 5 | 5 | |
Elongation at break | Performance variance rate % | -50 | -55 | -55 | |
Maximum after aging % | 200 | 180 | 180 |
Index | Between fabric layers | Between cover layer and belt core | |
Cover layer thickness 0.8-1.5mm | Cover layer thickness >1.5mm | ||
Average of all test samples, N/mm, no less than | 3,0 | 2.2 | 2.6 |
The lowest date of all test samples, N/mm, no less than | 2.0 | 1.6 | 2.0 |