1,tension resistant
2,low elongation in warp
3,good teoughability in weft
4,good water resistant
tension resistant low elongation in warpgood teoughability in weftgood water resistant
Features
common specification: EP100 EP200 EP300 EP400 EP500 EP630belt width(mm): 300-2000
Polyester conveyor belt also called EP conveyor belt.
Its tension resistant body is canvas woven by polyester in warp and good trough ability in weft, good water resistant, wet strength, no mould is suitable for medium, long distance and heavy-load transportation of material. Because of the high initial modulus of polyester, the belt can choose a relative low safety factor.
The physical and mechanical properties of nylon and EP conveyor belt are as follows:
Physical and mechanical properties of covering layer: please refer to the physical and mechanical properties of common conveyor belt.Rank of overburden performance | Tensile strength | Elongation at break | Abrasion loss |
| MPa | % | % |
H | 24.0 | 450 | 120 |
D | 18.0 | 400 | 100 |
L | 15.0 | 350 | 200 |
Tensile property of through thickness The longitudinal tensile strength is not lower than the following nominal value 315N/mm, 400 N/mm, 500 N/mm, 600 N/mm, 630 N/mm, 800 N/mm, 900 N/mm, 1000 N/mm.The through thickness elongation rate of the belt should not less than 10%, the reference force elongation rate of trough thickness of the belt should no more than 4%.Straightness: no more than 25mm.
Specification and technical data of rubber conveyor belt
Fabric specs | Ply thickness | Strength(N/mm) | Cover thickness | Width | Length | ||||
| Mm/ply | 2ply | 3ply | 4ply | 5ply | upper | lower | mm | m |
EP60 |
| 160 | 240 | 320 | 400 | 1.5-12 | 0-4.5 | 400-2600 | 50-500 |
EP100 | 1 | 200 | 300 | 400 | 500 | ||||
EP150 | 1.1 | 300 | 450 | 600 | 750 | ||||
EP200 | 1.2 | 400 | 600 | 800 | 1000 | 500-2600 | |||
EP250 | 1.35 | 500 | 750 | 1000 | 1250 | ||||
EP300 | 1.45 | 600 | 900 | 1200 | 1500 | ||||
EP350 | 1.6 |
| 1050 | 1400 | 1750 | 800-2600 | |||
EP400 | 1.75 |
|
| 1600 | 2000 | 1000-2600 | |||
EP500 | 1.9 |
|
| 2000 | 2500 | ||||
EP630 | 2.1 |
|
| 2400 | 3000 |
Production facilities
Inspection equipment