Welcome to B2BAGE
Tyre retreading machine&reclaimed rubber machine
Tyre retreading machine&reclaimed rubber machine

Minimum Order: 0
Quality/Safety Certification: 0.00


Rubber regeneration equipment
High temperature dynamic devulcanizer
Continuous stirred heat hermetically
Effective devulcaniz

Reclaimed rubber dynamic devulcanizer-Tyre retreading machine

This product is used for that in order to reach even and effective desulfidation for rubber powder, put

pulverous crosslinked rubber, softener, activator and water into the pot ,heat hermetically and mix contlnuously, adopted key equipment for the technology of high temperature dynamic desulfidation.

 

 

                       Parameter
Content

 Model

ZT-3.3R

ZT-4.5R

ZT-6R

ZT-8R

Design Pressure

2.1Mpa

2.1Mpa

2.1Mpa

2.1Mpa

Working Pressure

1.8Mpa

1.8Mpa

1.8Mpa

1.8Mpa

Design Temperature

3000C

3000C

3000C

3000C

Working Temperature

2090C

2090C

2090C

2090C

Active Volume

3.0m3

4.5m3

6m3

8m3

Rotate Speed of Blender

16r/min

16r/min

15r/min

15r/min

Jacket Volume

0.72m3

1.04m3

1.6m3

1.8m3

Design Pressuer of Jacket

0.5Mpa

0.5Mpa

0.5Mpa

0.5Mpa

Working Pressure of Jacket

0.3Mpa

0.3Mpa

0.4Mpa

0.4Mpa

Heating Method

Heat conduction oil

Hear Exchange Area

8.18m2

12.55m2

15m2

17m2

 

Motor Power

15kw

18.5kw

18.5kw

18.5kw

 

 

 characteristics 

This product is a horizontal pressure vessel Type II, heats up with the heat conduction oil. Customers

 could select two ways-automatic and manual operation for pot gate opening and closing. Upside of the

pot is charge port, and downside is discharge port. Full auto-dynamic pot opening and closing gate is controlled by hydraulic pressure. Adopt manual mechanical alternate out hand opening and closingate

for the manual dynamic opening and closing gate. Above two dynamic pots are linked to the zero pressures witch to ensure safety. Adopt JZQ series reducer through douole row chain wheel rotating or direct driving for the blender, positive and negative rotating could be controlled automatically. The shape of mixing propeller is assorted of ribbon and mural. The parts of pressure vessel are designed and manufactured according to BG150-98 “Steel Pressure Vessel” and have been inspected examination and approved by. Hebei

 province Technology Inspection Office of Boiler and Pressure Vessel.

Ads by Google



About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 B2BAGE Limited and/or its subsidiaries and licensors. All rights reserved.