Truck tyre retreading buffer(Chuck type)
1.Suiltable for tyres below 24"
2.Buff the crown, shoulder
3.Suit to wing-tread
Truck tyre retreading buffer(Chuck type)
Main function: Remove the worn tread surface, trues up the roundness and prepare a good rough surface for a new tread. Can trim the shoulder separately.
General specification
MACHINE PARAMETER | |
Dimension | 2210mm×2740mm×2410mm |
Weight | 2591kg |
Total power | 25KW |
Power Supply | 50HZ /380V |
Gas Supply | More than Min 0.8Mpa, Gas supply pipe dimension is 1/2 inch |
Water Suply Requirement | Water supply pipe dimension is 1/2 inch, with pipe switch valves |
Max. Tyre Diameter | 1300mm |
Max. Tyre Weight | 136kg |
Grinding Efficiency | 4-8 minutes/ tyre |
Noise Loudness | Less than 80 db |
Main Components |
|
Touchscreen,Function Module, CPU | SIEMENS |
low-voltage electrical apparatus | SCHNEIDER |
Pneumatic Components | FESTO( China factory) |
Note:
1. Chuck tyre rather than expandable hubs
2. Oil cylinder, without ejector rod and air cylinder.
3. Friction drive, all kinds of tyres have uniform linear speed.
4. Large diameter rotary table, keep stable.