Welcome to B2BAGE
Deerskin glove
Deerskin glove

Minimum Order: 0
Quality/Safety Certification: 0.00


Deerskin glove
1.Deer skin leather Palm
2.Spandex Back & Neoprene for Knuckle Protection
3.Spandex finger
4.Elastic cuff

Deerskin glove

Model Number:rb818

Feature: Stretch fabric back for flexibility and fit.

Deerskin leather palm adds comfortable.

pading on the palm adds anti shock.

Spandex finger is for flexibility.

Elastic cuff keep debris out.

Wing closing strap for perfect adjustments and
easy-on, easy-off.

Pakage:A plastic bag per pair,120pairs per carton(58*28*45)

Quantity/20FCL:4500dozens

Payment term:T/T(30%in advance,70%after shipment)

Application: Automotive/Oil industry/Mechanic/Heavy machine/Household

About your LOGO we can do

PVC Label and Silicon print

 

Embroidery

 

Digital heat transfer

 

CE standard

EN 388

Gloves giving protection from mechanical risks

Protection against mechanical hazards is expressed by a pictogram followed by
four numbers (performance levels), each representing test performance against a specific hazard.

 

1 Resistance to abrasion
Based on the number of cycles required to abrade through the sample glove (abrasion by sandpaper under a stipulated pressure). The protection factor is then indicated on a scale from 1 to 4 depending on how many revolutions are required to make a hole in the material. The higher the number, the better the glove. See table below.

 

2 Blade cut resistance
Based on the number of cycles required to cut through the sample at a constant speed. The protection factor is then indicated on a scale from 1 to 4.

 

3 Tear resistance
Based on the amount of force required to tear the sample.
The protection factor is then indicated on a scale from 1 to 4.

 

4 Puncture resistance
Based on the amount of force required to pierce the sample with a standard sized point. The protection factor is then indicated on a scale from 1 to 4.

If some of the results are markt with a X means that this test performance is not tested. If some of the results are markt with a O means that the glove did not pass the test.

 

Test

Performance level

 

1

2

3

4

5

Abrasion resistance (cycles)

100

500

2000

8000

 

Blade cut resistance (factor)

1,2

2,5

5

10

20

Tear resistance (newton)

10

25

50

75

 

Puncture resistance (newton)

20

60

100

150

 

 

 

 

 

 

EN 420

This standard defines the general requirements for protective gloves in terms of construction, fitness of purpose, safety, etc

· The gloves themselves should not impose a risk or cause injury.

· The pH of the gloves should be as close as possible to neutral.

· Leather gloves should have a pH value between 3.5 – 9.5.

· The highest permitted value for chromium is 3 mg/kg (chrome VI).

· Specific details of any substance used in the glove which is known to cause allergies

· Sized by reference to an agreed common European hand size, for example minimum length.

Ads by Google

Related Searches


About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 B2BAGE Limited and/or its subsidiaries and licensors. All rights reserved.