New Sand Maker For Sand
1.Vertical Shaft Typed
2.Higher ratio
3.Improved capacity
New Sand Maker For Sand
A sand making machine, also known as sand maker, is mainly composed of upper cover, cylinder, impeller, rotor etc. Xuanshi VSIX vertical shaft impact crusher is newly-designed on the basis of advanced sand making technology of Germany and America. Compared with VSI sand making machine, it has higher reduction ratio, improved capacity and lower power consumption.
Performance and Features of New Sand Maker For Sand
1. The sand making machine integrates three crushing modes, and can continuously work for 720 hours.
2. Higher crushing chamber, greater crushing impact
3. During the parts and material procurement, production and processing, the quality is strictly controlled. Wearing parts is optimally allocated for longer service life.
4. Hydraulic autonomous system: convenient maintenance, high performance, low failure rate
5. The whole frame adopts elastic reinforcement technology, eliminating the problems like easy fracture of motor frame.
Working Principle of New Sand Maker For Sand
Materials vertically fall into the rotating impeller, and under the influence of centrifugal force, the materials collide with the materials distributed around the impeller. After the collision, the materials will also impact with the vortex between the impeller and casing until they are crushed. Through recycled broken system, the particles with satisfactory size will be discharged from the lower part of the machine.
Technecal Specification of New Sand Maker For Sand
Model | VSIX7620X | VSIX8526X | VSIX9530X | VSIX1140X | |
Capacity (t/h)
| Fed at center and sides | 130-200 | 210-300 | 310-440 | 480-600 |
All fed at center | 65-100 | 105-150 | 155-220 | 230-300 | |
Max feed size(mm) | Soft | <35 | <40 | <45 | <50 |
Hard | <30 | <35 | <40 | <45 | |
Rotation Speed(r/min) | 1700-1890 | 1520-1690 | 1360-1510 | 1180-1310 | |
Double Motor Power(KW) | 90-150 | 150-180 | 320-360 | 400-440 | |
Overall Dimension LxWxH(mm) | 3700 x 2150 x 2100 | 4140 x 2280 x 2425 | 4560 x 2447 x 2778 | 5000 x 2700 x 3300 | |
Weight (t) | 7.8 | 10.3 | 16 | 25.6 | |
Voltage | 380v50Hz | ||||
Vibrating Sensor | 0.1-20mm/s Detect range 0.1~20mm/s continuous and adjustable | ||||
Lubrication Hydraulic System | Double Motor Power | 2 x 0.31KW | |||
Safety Assurance | Double oil pumps ensure enough oil supply; Automatic switch-off with no oil steam and no oil hydraulic pressure | ||||
Over Dimension LxWxH (mm) | 820 x 520 x 1270 | ||||
Power of Oil Tank Heater | 2KW | ||||
New Sand Maker For Sand
