Sand Making Machine
Simple structure
Convenient maintenance
High efficiency & low consumption
Little dust pollution
I. Usage and Application
Sand Making Machine is widely used for fine crushing and coarse grinding in mining, rocks, fireproof materials, glass raw material and metallurgy residues. It is much more professional than other crushers in crushing hard and anti-abrasion materials such as carborundum, sintered bauxite, magnesite and so on. It is usually used as sand making machine in the sand production line.
II. Working Principle
The materials fall into the crusher and are divided into two parts. One part goes into the high-speed-running impeller of the machine, and the other part goes around the impeller. The two parts materials bump and crush fast during the effect of centrifugal force. Then the materials run like swirl, bump and rub to each other again and again. The finished products go out from the bottom of the machine, and users can get the requested products size after screening by vibrating screen.
III. Features
1. Simple structure and low investment cost.
2. High efficiency and low consumption.
3. Less abrasion of impeller liner, convenient in maintenance.
4. Having the function of fine crushing and coarse grinding.
5. Slightly influenced by the moisture content of the material. The max moisture content is 8%.
6. Suitable for crushing materials of middle hardness and high hardness.
7. Cubic shaped finished products, high stack density, and low iron pollution.
8. Working noise <75db, and little dust pollution.
IV. Main Specifications
Model
Impeller Speed
(rpm)
Max. Feeding size
(mm)
Capacity
(t/h)
Motor
Power
(kw)
Weight
(t)
Overall
Dimension
(mm)
PCL-600
2000-2600
30
12-30
2×30
5.6
2800×1500×2030
PCL-750
1500-2500
35
25-55
2×45
7.3
3300×1800×2440
PCL-900
1300-1700
40
50-80
2×55
12.1
3750×2120×2660
PCL-1050
1100-1450
45
70-120
2×110
16.5
4480×2450×2906
PCL-1250
950-1200
45
80-160
2×132
22
4563×2650×3176
PCL-1350
800-1200
50
120-220
2×160
26
5340×2940×3650