Minimum Order: 0
Quality/Safety Certification: 0.00
1.Sand making machines PCL-600
2, simple structure, small abrasion
3, high crushing efficiency;
4, cubic final sand.
picture of Sand making machines PCL-600 | |
descripation of Sand making machines PCL-600 | Sand making machines PCL-600: 1. Center Feeding: Raw material falls down into feed hopper, then enters impellor through central entrance hole. It is accelerated in high-speed impellor, then is thrown out at speed of 60-75m/s. When hitting impact plate, it is crushed. Final products come downwards though outlet. 2. Ring Feeding: Raw material falls down into feed hopper, then through ring, it is devided into two parts by material-dividing plate. One enters into impellor through the center of material-dividing plate. The other falls down from outside of material-dividing plate. In this way, material is crushed. Sand making machines PCL-600: 1. Simple structure, low cost. 2. High efficiency and low consumption. 3. Primary and second crushing capacity. 4. More and most hard materials can be crushed. 5. Cubic shaped final product. 6. Little noise and dust pollution. 7. Convenient performance, maintenance, installation |
parameter of Sand making machines PCL-600 | Type | Impeller speed (r/min) | Enters the material limit (mm) | Capacity (t/h) | Motor model | Power (kw) | Size(mm) | PCL-600 | 2000-2600 | 26 | 8-50 | Y200L1-2 | 30×2 | 2800×1550×2030 | PCL-600B | 2000-2600 | 26 | 8-50 | Y200L2-2 | 37×2 | 2800×1550×2030 | PCL-750 | 1500-2500 | 35 | 25-55 | Y255M-4 | 45×2 | 3300×1800×2440 | PCL-900 | 1300-1700 | 35 | 55-120 | Y250M-4 | 55×2 | 3750×2120×2660 | PCL-900B | 1000-1450 | 40 | 60-150 | Y280M-4 | 90×2 | 3750×2120×2660 | PCL-1050 | 1000-1700 | 40 | 100-160 | Y315S-4 | 110×2 | 4480×2450×2906 | PCL-1250 | 950-1200 | 40 | 100-200 | Y315M-4 | 132×2 | 4563×2650×3176 | PCL-1350 | 800-1200 | 60 | 160-360 | Y315L2-4 | 200×2 | 5340×2940×3650 |
|