1EPS sandwich panel
2LightWeight,Sound Insulation
3Heat Insulation
4Fire/Water Proof
5Fast/construction

EPS sandwich wall panel,

 1. Composition: 

    Core materials: cement, EPS, and fly ash core.
    Surface materials: fiber reinforced calcium silicone board or cement calcium silicone board

2. Specification: (L*W*T) 

    1500-3000mm X 610mm X (60, 90,120,150,180mm)

3. Usage:             

    Interior and exterior partition on steel or concrete structure building,

    For new construction, additions or renovations.

4. Advantages:   

    Energy-saving    Light weight    Sound insulation    Environmental protection    Most area-saving    Most waterproof and dampproff    Most fire-proof    Most sound-insulation    Best hanging force    Most anti-seismic and impact resistance    Largest span and height thin webbed wall    Most civilized, environmental, high efficiency construction.

5. Key Specifications/Special Features:

Wall thickness: 60, 75, 90, 100, 120, 150 and 180mm Maximum width: 610mm Length: according to custom demands, engineering requirements, and shipment conditions Characteristics: Energy-saving, lightweight, and environmental protection Polyphenyl granule in Vanjoin board has good heat-insulation effect and heat lost ratio is far below the other brick wall building Energy-saving effects of the building is greatly improved Raw materials do not include harmful substances Environmental products, it is highly recommended by the government Capacity: 650kg/m3, just one sixth of the brick building Comparison of inner wall panel 75 and 120mm it will increase 12m practical area, for 100m2 house, it will increase 4.16m2 Waterproof and damp resistant With fireproof feature Applications: Can replace construction materials as red bricks, clay solid bricks, air bricks, color-coated steel sandwich boards, gypsum blocks, wire spatial grid structure perlite boards, and perlite porous board Can widely be applied to wall materials of various high and low buildings such as banks, office buildings, hospitals, schools, hotels, malls, amusement halls, active barracks, old houses reconstruction, residences, and workshops Performance Index:

NO.	Item	National Standards			Testing Indexes
		60mm	90mm	120mm	60mm	90mm	120mm
1	/ Anti-impact Capacity/times	≥5	≥5	≥5	≥8	≥10	≥15
2	/ Anti-bending damageload/times over deadweight	≥1.5	≥1.5	≥1.5	≥3	≥4	≥5
3	/Mpa Compressive strength /Mpa	≥3.5	≥3.5	≥3.5	≥5	≥5	≥5
4	Softening coefficient	≥0.80	≥0.80	≥0.80	≥1	≥1	≥1
5	/Kg/ Surface density g/	≤70	≤90	≤110	≤55	≤70	≤85
6	a/% Moisture rate  a/%	≤12/10/8			≤10/9/7
7	/mm/m Drying shrinkage value /mm/m	≤0.6	≤0.6	≤0.6	≤0.45	≤.0.5	≤0.5
8	/N Hanging force	≥1000	≥1000	≥1000	≥1200	≥1300	≥1500
9	/Db Sound insulation capacity in the air /Db	≥30	≥35	≥40	≥35	≥40	≥45
10	/h Fire proof limit /h	≥1	≥1	≥1	≥2.5	≥3	≥4
11	b/w/.k Heat transfer coefficient  b/w/.			≤1.0			≤1.0
12	Radioactivity Limit	≤1	≤1	≤1	≤1	≤1	≤1
13	IRa IRa Inner radiation indexes	≤1	≤1	≤1	≤1	≤1	≤1
14	Ir Ir Outer radiation indexes	≤1	≤1	≤1	≤1	≤1	≤1

 

6. Supplied to: Iran, Kazakstan, Russia, Australia, India, Dubai, South Africa and so on.