Carbide strips for wood cutting tool:
Quality from carbide kindom of China-zhuzhou
Recommened grades: YG6, YG8, YS2T
Grade, performance and application of cemented carbide strips
Grade | Enquivalent To ISO | Density (g/cm3) | HRA | T.R.S (Mpa) | Application |
YG6 |
K10 |
14.8 |
≥90.0 |
≥2150 | High wear resistance, used for hard wood, used for processing original wood, aluminum section bar, brass rod and cast iron. |
YG6A |
K10 |
14.9 |
≥92.0 |
≥1860 | Higher wear resistance than YG6, used for processing hard wood, original wood,
aluminum section bar, brass rod and cast iron. |
YG8 |
K20-30 |
14.8 |
≥89.5 |
≥2320 | High wear and percusstion resistance,used for processing hard wood, soft wood, ferrous and non ferrous section bars. |
YS2T |
M10 |
14.8 |
≥92.0 |
≥2350 | Fine grain alloy, high wear resistance, high anti-bending strength, high resistance to bonding, high thermal strength. Machining of refractory alloys, stainless steel and high manganese steel, etc. |
YS25 |
P25 |
13.8 |
≥91.0 |
≥2200 | High hardness and good wear resistance, suitable for rough turning, milling and planing of carbide steel, cast steel, high intensity steel and steel alloy. |
YL10.2 |
|
14.5 |
≥92.2 |
≥2150 | Wear resistance and strength comparatively higher, suitable for processing cast iron, non-ferrous and non-metal materials. |
Regular Specification:
Width: 3-16, 18, 20, 22, 25, 28, 30, 32, 35, 40, 70 mm
Thickness: 1.5-6 mm
Length: 310 mm( we can cut it to different length as required)
News molds can be also made due to your requirement.