1.PET material
2.Transparency is 95%
3.Anti-scratch,wear resistance
4.Durable and reusable
5.Self-adhensive,no bubble

Features  :

 Hot product screen protector for TOUCH 

1.High-transparency screen protector of the surface with a SMART process to prevent from abrasion and scratching .

2. Use silica gel compound layer as the adhesive to avoid producing air bubble.

3. Leave with no residue and would not corrode the surface.

4. With a transparency above 92%.

5. Create no light reflection and increase the color reducibility of LCD screen.

6. Effectively prevent UV

7. Can effectively absorb some of the direct collision to protect your LCD screen.

8. Safe ,reliable ,does not contain any harmful ingredient to the human body .

9. long lasting protection

10. OEM/ODM: accepted

11. made from high quantity PET material, all the material is environmental

12. up to 4H for anti-scratch, anti-glare, dustproof and waterproof

13. silicone adhesive coating: no glue residue when removed

14. ultra smooth surface: enhance the experience and utilization of touch screen and stylus features

15. UV protection: reduces eye strain caused by the LCD screen

16. Washable and reusable: never need to buy another screen protector again

Step 1:Check protector size

Clean your hands and adjust the location where the protector would be on. Please arrange the protector to the center of the screen before you take off all vinyl of the hard film.

Step 2: Clean the screen

Clean the screen with cleaner and micro fiber cloth. If there is dust left on the screen ,that can cause bubbles. Apply cleaner on the cloth,not on the screen. When you are cleaning the screen, please clean from one side to the other side, do not wipe back and forth while blowing the dust at the same time.

Step3:Paste protector and squeeze the bubbles

Below the red label is the glue side of the protector, this side will face to the screen , follow the instructions on the label, peel off the protective film with red label 1 first.

Attached to the screen carefully. when pasting, you must also exclude thet bubble under the protector. (Notes: avoid your finger touching the protector glue side,or you may leave veneer of dust or fingerprints, then paste the bubble would not look good .)If there are bubbles producing, you can use the cleaning cloth and srape card to slowly squeezed out. After confirm completed , peel off the label with step 2, everything is done.