Ceramic Fiber Packing
Ceramic Fiber Packing Coat With Graphite
Nickel Wire Ceramic Fiber Packing Coat With Graphite
Ceramic Fiber Packing
Model No.: HD3007
Square braided by ceramic fiber, without any impregnant, No expansion without shrinkage. Normally reinforced by fiberglass or steel wire, round section or square section.
Ceramic Fiber Packing Coat With Graphite
Model No.: HD3008
Coat with graphite, is commonly used in valve and other static seal high temperature situation
Ceramic Fiber Packing Reinforced by Nickel Wire Coat With Graphite
Model No.: HD3009
Coat with graphite, Reinforced by fiberglass or nicket wire or stainless steel wire
Usually as static seal used in heat insulation and fire prevention of stove, burner, heat exchanger,pipeline etc.
Reinforcement | Working Temperature |
Fiberglass | 650°C |
nicket wire, stainless steel wire | 1260°C |
Pressure: 3-20Mpa
Shaft speed: 12m/s
PH: 3-14
Size: 3*3mm--50*50mm