Gland Packing
series includes:
Aramid fiber packing series,
high water based packing series,
carbon fiber packing series,
Packing includes:
Pure PTFE Packing
Pure PTFE Packing with silicone oil
Sintered PTFE Packing
Graphite PTFE Packing
Graphited PTFE Packing with oil
Sintered Graphite PTFE Packing
GFO Packing
Expanded PTFE round rope
White PTFE & aramid Packing
PTFE Packing
PTFE Packing with Kynol fiber corners
PTFE packing is mainly made of PTFE yarns and can be impregnated with aramid lubricant, graphite lubricant or other lubrication. It is soft, designed for valves and pump; medium shaft speed applications under medial pressure in food processing, pharmaceuticals, paper, fiber plants where high purity and corrosion resistance is required.
Carbonized Fiber Packing includes:
Carbon Fiber Packing
Carbonized Fiber Packing
Carbon Fiber Packing with graphite impregnation
Carbon Fiber Packing reinforced with strong aramid in four corners
Carbonized Fiber Packing with PTFE
It is a braided packing made of carbon fiber which is impregnated with PTFE emulsion or braided with aramid. It is inert to almost all corrosive chemicals. When it is used for pumps, frictional heat is freely conducted to the stuffing box metal because of its excellent thermal conductivity, and thus no damage will be caused to the packing. It can replace PTFE asbestos packing within wide service range. It can be used to seal corrosive fluids except strong oxidizer acids, organic solvents, fluids where contamination is not permissible for centrifugal pumps, plunger pumps, mixers valves, etc.
Graphite Packing includes:
Expanded Graphite Packing
Reinforced Graphite Packing (with corrosion inhibitor)
Graphite Packing tolerant to high temperature and high pressure
Graphite Packing with PTFE impregnation
Graphite Packing with carbon fiber corners
Graphite Packing with PTFE corners
Graphite Packing reinforced with inconel wire & mesh wrapped
Inconel reinforced carbon fiber packing with graphite core
Graphite Packing reinforced with steel wire
Graphite Packing can be used to seal hot water, high temperature and pressure steam, heat transfer fluid, hydrogen gas, ammonia, organic solvents, hydrocarbons, cryogenic liquids ect.
According to the variation of chemical environment, it can be impregnated or reinforced with other material as PTFE, carbon fiber, inconel wire, steel wire, etc. The sealing capability is more better and safety. It is the most effective composite parts for solving problems.
