model:FF-60W-12C,FF-60W-12HC,FF-60W-24HC,FF-60W-24C
voltage:12/24V
power:55-58W
operating temp:-10C--+70C
weight:2.6KGS
FF-60W Peltier--Thermoelectric Cooler Air to Air
Naming methods:
FF--- Hot & Cold side both use Fan cooling
60W- The Max of cooling power, Temp difference=0
Features:
1, Using semiconductor electronic cooling, small volume, light weight.
2, No compressor, no Freon, no pollution, no vibration, no leak.
3, Using no pollution material, compliance RoHS
4, Free mounting, applicable to a variety of places.
5,Working ambient temperature: -10 C~+70 C
6, Dense fin extrusion heat sink, high efficiency
7, High-dense foam insulation between heat sink and cooled heat sink.
8, Hot-side heat sink overheat protection temperature setting +75 C± 5 C
9, Applied in sealing, vibration or rotation places such as compressors do not work.
Note*:
Cool only, Using a overheat protector on the bottom of heat sink. Heat/Cool, Using two overheat protectors between cooled sink and heat sink.
Notes with use *:
1.please use 12/24VDC switching power,and the ripple factor is less than 10%.
2.don't drop from than 30cm height,the Bi2Te3 will be damaged,
3.not waterproof,only aplied in indoor or outdoor of rainscreen.(Except IP55)
4.please keep away from wall or other objects more than 10cm,when install it.
5.no starting up,when the ambient temperature and the heat sink over 70C,or it will be damaged.
6.please read the specification and other accessories carefully.
