High accuracy Good linearity
Low thermal drift
Good current overload capability
Conform to UL94-V0 standard
Fast response ti

elevator converter sensor

Applications:
For the electronic measurement of currents: AC, DC IMPL.,etc.,with galvanic isolation between the
primary (high power) and the secondary (electronic) circuits.

Main technical data:
1. Primary normal current IPN: 50A r.m.s
2. Primary current, measuring range IP: 0~+/-100A
3. Measuring resistance: RMmin RMmax
with +/-12V @ +/-50A max: 0 ohm 210 ohm
@ +/-100A max: 0 ohm 30 ohm
with +/-15V @ +/-50A max: 30 ohm 330 ohm
@ +/-100A max: 30 ohm 90 ohm
4. Secondary normal current: 25mA rms
5. Conversion ratio: 1:2000
6. Supply voltage(+/-5%): +/-12V~+/-15V
7. Current consumption: 10mA+ Secondary output current
8. Isolation test: Between the primary circuit to the secondary circuit(+.-.M):2.5kVrms/50Hz/1min

Accuracy – Dynamic performance data:
1. Accuracy @ IPN, TA=+25 oC , @+/-12V~+/-15V: +/-0.9%
2. Non-linearity: better than +/-0.2%
3. Offset current: not more than +/-0.1mA(@+25oC)
4. Residual current @ IP=0, TA=+25 oC, after an overload of 3xIP: +/-0.15mA
5. Thermal drift: +/-0.25mA(0 oC ~+70 oC)
+/-0.3mA(-25 oC ~+85 oC)
6. Reaction time @10% of IP max : less than 500ns
7. Response time: not more than 1us
8. dI/dt accurately followed: better than 200A/us
9. Frequency Bandwidth (0.5dB): DC 0..200kHz

General data:
1. Operating temperature: -25ºC~+85ºC
2. Storage temperature: -40 oC ~+90 oC
3. Secondary coil resistance: not more than 150 ohm
4. Weight: 20g
5. Standards: EN 50178

Features:
1. Hall effect measuring principle
2. Galvanic isolation between primary and secondary circuit
3. Insulated plastic case made of white PPO recognized according to UL 94-V0
4. The whole current transducer comply with RoHS Directive completely