ignition magnetic pulse wave spark sensor
type:clamp
form:ignition
applied:2,4,6,12 pulse engine/motor

Ignition magnetic pulse wave spark sensor:

Ignition pulse sensor

A, Summary

Clamp type ignition pulse through the high pressure sensor gasoline engine ignition pulses to provide speed and mark cylinder signal. Measured by high pressure pulse amplitude should be greater than 5 KV or current pulse greater than 100 mA, sensor with card when face to pack spark plug in the direction of the spark plug. The speed: sensor card installed in any one points cylinder on the high tension line; The ignition are always: the sensors mounted on card must be 1 cylinder points cylinder on the high tension line; Adapted to the engine speed detection and ignition timing detection.

B.The product characteristics

· installation is simple, clamp ignition wires can live test

· universal type sensor, do not need to set the engine cylinder, stroke parameters

· operation is extremely simple

C.product specifications

Applicable engine: 2,4,6,12 length of the gasoline engine;

Sensing means: electromagnetic induction method;

Testing site: high voltage ignition coils of wire subprime end;

The output signal: the pulse signal;

Signal cable: heat-resistant type signal cable (4.9 m long);

Using temperature range: 30 ~ + 120 °C-

Overall size: 152 (W) x 54 (H) x 16 mm (D);

Weight: about 240 g