SL2 SERIES PHOTOELECTRIC AREA SENSOR
Minimum Order: 0
Quality/Safety Certification: 0.00
Beam channels: 8,12,16,20,24,28,32, beam channels
Sensing height: 140mm ~ 620mm
Sensing range :7M
| NPN output | SL2-***N-8 | SL2-***N-12 | SL2-***N-16 | SL2-***N-20 | SL2-***N-24 | SL2-***N-28 | SL2-***N-32 | |
| PNP output | SL2-***P-8 | SL2-***P-12 | SL2-***P-16 | SL2-***P-20 | SL2-***P-24 | SL2-***P-28 | SL2-***P-32 | |
| Sensing height | 140mm | 220mm | 300mm | 380mm | 460mm | 540mm | 620mm | |
| Sensing range | 5m | |||||||
| Beam pitch | 20mm | |||||||
| Sensing object | φ30mm or more opaque object | |||||||
| Supply voltage | 10-30V DC | |||||||
| Emitter | Job indicator ON | 0.7W or less | 0.8W or less | 0.9W or less | 1.0W or less | 1.1W or less | 1.2W or less | 1.2W or less |
| Job indicator OFF | 0.6W or less | 0.7W or less | 0.8W or less | 0.9W or less | 1.0W or less | 1.1W or less | 1.1W or less | |
| Receiver | Job indicator ON | 0.7W or less | 0.8W or less | 0.9W or less | 1.0W or less | 1.1W or less | 1.2W or less | 1.2W or less |
| Job indicator OFF | 0.6W or less | 0.7W or less | 0.8W or less | 0.9W or less | 1.0W or less | 1.1W or less | 1.1W or less | |
| Output | NPN output type: PNP output type: | |||||||
| Utilization category | DC-12 or DC-13 | |||||||
| Output operation | ON when all beams are received (OFF when one or more beams are interrupted) | |||||||
| Short-circuit protection | Incorporated | |||||||
| Response time | 10ms or less ( 12ms or less when the interference prevention function is used ) | |||||||
| Indicators | Emitter | Emitting indicator :Green LED × 2 ( light up during emission ; one LED lights up for Frequency A setting , both LEDs light up for Frequency B setting ) Job indicator : Red LED ( lights up , blinks or lights off when the job indicator input is applied , selected by operation mode switch ) | ||||||
| Receiver | Operation indicator : Red LED ( lights up when one or more beams are interrupted ) Stable incident beam indicator : Green LED ( lights up when all beams are stably received ) Job indicator : Red LED ( lights up , blinks or lights off when the job indicator input is applied ,selected by operation mode switch ) When an excess current flows through the output , the stable incident beam indicator and the operation indicator on the receiver blink simultaneously due to operation of the short-circuit protection circuit . | |||||||
| Interference prevention function | Incorporated | |||||||
| Test-run function | Incorporated | |||||||
| Environmental resistance | Pollution degree | 3 ( Industrial environment ) | ||||||
| Ambient temperature | -10 to +55 ( No dew condensation or icing allowed ) , Storage : -10 to +60 | |||||||
| Ambient humidity | 35 to 85 % RH ,Storage : 35 to 85 % RH | |||||||
| Ambient illuminance | Sunlight :10,000 at the light-receiving face , Incandescent light : 3,000 at the light-receiving face | |||||||
| EMC | IEC 60947-5-2 ,Parts 7.2.6.1.2.3 or RFI >3V/m ( in 30-1000MHZ ) ,EFT>1KV , ESD >4KV ( contact ) | |||||||
| Voltage with standability | 1,000V AC for one min . between all supply terminals connected together and enclosure | |||||||
| Insulation resistance | 20MΩ, or more , with 250V DC megger between all supply terminals connected together and enclosure | |||||||
| Vibration resistance | IEC 60947-5-2 , Part 7.4.2 or 10-55HZ , 1.0 mm amplitude in x , y and z directions for 30 min | |||||||
| Shock resistance | IEC 60947-5-2 , Part 7.4.1 or 30g , 11 ms in x , y and z directions for six time each | |||||||
| Emitting element | Infrared LED ( modulated ) | |||||||
| Material | Enclosure : Heat-resistant ABS , Lens cover : Polyester , Indicator cover : Acrylic | |||||||
| Cable | 0.2mm2, 4-core cable , 3m long | |||||||
| Cable extension | Extension up to total 25 m is possible for both emitter and receiver , with 0.2 m2, or more , cable . | |||||||
| Weight | 350g approx . | 400g approx . | 450g approx . | 500g approx . | 570g approx . | 650g approx . | 730g approx . | |
