RF-2410M uses Silicon labs C8051F330 MCU as the master IC unit, with the RF-2400-V03 module. The module is compact and powerful.

Introduction:

After RF-2400 cost-effective wireless modules, INHAOS launches the RF-2410 series modules. RF-2410 series modules is a SOB (System On Board) module based on RF-2400 modules adding MCU.RF-2410 series modules is a cost-effective module with more powerful and convenient RF solutions.

RF-2410M uses Silicon labs C8051F330 MCU as the master IC unit, with the RF-2400-V03 module. The module is compact and powerful. C8051F330 MCU has 8K Flash program memory, 1T command rate, with 24.576MHz crystal oscillator, can achieve close to 25MIPS processing speed. RF-2400-V03 provides air transfer rate up to 2Mbps. Therefore, RF-2410M can be widely used in data transmission, audio, video transmission, wireless data collection and other short-range, high-rate areas.

Feature:

  1.  Adopt RF-2400-V03 modules, with good RF performance, stable quality and a large number of application reference

  2.  Adopt C8051F330 MCU, 25MIPS, 8KB Flash, 768B RAM

  3.  On-board with high precision and low noise 3.3V LDO, making the module can be work under 3.3 ~ 7V voltage

  4.  Configure precise 24.576MHz crystal oscillator on external MCU

  5.  6 Pin connector:

        1.Provide TXD / RXD standard UART interface

        2.It can be set to the lowest power mode (less than 5uA) in application, wake up by the RESET pin when needed

        3.CONFIG pin is used for the user's system configuration

        4.Users can write software to redefine the function of the pin configuration to achieve more application

 6.On-board C2 debug interface, very easy for simulation and burn 

 7.Two LED (red and green), exact instructions for work status

 8.RF communication with any of RF-2400, RF-2410 series products

 9.Support 1x6Pin 2.54mm Connector and patch connecting

 10.Can both be used with the user system, and work alone

 11.Can be applied directly to the mass production, without any further changes to reduce the risk of technology transfer

 12.High cost-effective

Applications:

  Wireless Serial

  Adding data transmission system to existing RF

  wireless audio and video transmission

  Wireless Data Collection

  Low-cost, low-power wireless networking

  Wireless sensor node (WSN)