*DVB-S with CA MPEG2
*Chipset:250 MHz IBM PowerPC Processor (350 Mips)
*1 x Smartcard-Reader
*Channel-change time < 1 second

Feature:
1) 250 MHz IBM PowerPC Processor (350 Mips)
2) Linux operating system
3) 1 card reader
4) MPEG2 hardware decompression
5) DVB-S, DVB-C
6) V. 24/RS232 interface
7) 100Mbit Ethernet interface two-way
8) 2 LED instructions
9) Unlimited number of TV / radio channel list
10) Channel switching time less than 1 second
11) Full automatic service scan
12) EPG (Electronic Program Guide)
13) Support for DiSEqC
14) Multi-lingual
15) The number of bit-stream output SPDI / F interface (AC-3 / DTS)
16) 1 European Scart plug (software control)

Technical parameters:
*IF input: 950-2150 MHz
*Signal Level - 65 dBm...- 25 dBm
*Signal-to-Noise 12 dB maximum.
*Mother of the first socket F
*75 ohm input impedance
*AFC + / - 3 MHz
*QPSK
*The scope of input symbol rate 2...45 M, SCPC / MCPC
*Forward error correction 1 / 2, 2 / 3, 3 / 4, 5 / 6, 7 / 8, automatic

*Video decoder:
MPEG-2 and MPEG-1 compatible
PAL G / 25 Hz standard
Video proportion of 4: 3 / 16: 9 (automatic)

*Audio decoder:
MPEG-1 & MPEG-2 Layer I and II
Stereo
Frequency: 32 KHz, 44.1 KHz, 48 KHz, 16 KHz, 22.05 KHz, 24 KHz

*Analog output:
Output Level L / R 0, 5 Vss 600 ohm
THD> 60 dB (1 KHz)
Isolation <-65 dB

*Digital output
Output Level 0, 5 Vss 75 ohm
Sampling digital filter 32 KHz, 44.1 KHz, 48 KHz
S/PDIF- optical output (AC3)

*Video parameters:
Input FBAS 1 Vss + / - 0.3 dB on 75 Ohm
Teletext filter: ETS 300 472 standard

*European Scart plug:
Output: FBAS, RGB, S-VHS

*RS232 interface:
Bitrate 115, 2 kBit / s maximum.
Pin SUB-D-9
Firmware upgrade

*Ethernet port
I firmware upgrade network

*LNB power and polarisation:
LNB Current 500mA maximum. Short-circuit protection
Vertical polarization LNB voltage <14V without load, > 11.5V (400mA)
Horizontal polarization LNB voltage <20V without load, > 17, 3 V (400mA)
LNB power-down standby

*Receive control
DiSEqC 1.0/1.2 SAT location / SAT Select
DiSEqC - motor control
Power consumption: <10W / 12V
Input voltage: DC12V, AC + / - 15%

*External power supply:
Input: 110-240V AC / 50-60Hz / 0, 6 A
Output: 12V = / 1A

*Physical Specification:
Temperature of +15 ° C...+35 ° C
Humidity <80%
Dimensions (W x D x H): 195 mm x 130 mm x 40 mm
Weight: 0.6 kg

Feature: