Manual mini sewing machine
Power supply:4xAA or AC/DC 6V 800MA
2 in 1 hand held desh top
easy and simple

 Manual mini sewing machine

 

Correct threading (reference to attached drawing 1. 1, 2, 3, 4, 5, 6). Please use threader for it can help you thread easily.

I.        Installation of battery 4 1.5V dry batteries;Open the battery cover at bottom of machine, correctively install the batteries by following the anode and cathode directions at the bottom. Close battery cover.

 

II.      Method of operationUse hand wheel to raise the needle to the top position, lift the cloth pressing board by using the back handle and then put the cloth;Put down cloth pressing board, clockwise rotate hand wheel for some rounds to switch on for start sewing.The switch of the machine has “high” and “low” gears. When the switch button is on “OFF”, it is shutdown; when it is pushed to “H”, it is high speed gear and “L” is low speed gear. Use hand for guiding cloth for straight movement of turn. Make it move naturally and do not pull forcefully so as to avoid breaking or jumping of thread.Turn of motor after use and rotate hand wheel to raise the needle to the top position. Pull out the thread from needle for 15~25mm and cut the thread. Attention: do not pull forcefully thread or cloth so as to avoid damage to machine part or needle. Raise cloth pressing board by using cloth pressing board handle. Lightly pull out cloth, upturn the sewed cloth and draw out thread, then knot in accordance with attached drawing 2.

 

III.    Method of knottingFirst draw the last line thread in threader;Draw the remained thread adversely through threader;Draw 10mm thread from the last line to form a thread ring;Pull out the thread from the remained thread and tighten it to complete knotting;Or pull the thread tail on the face to the back face of cloth, in this case steps 1 ~4 are not followed.