KY-901 liquid addition silicone rubber
electronic components and insulation potting,
rapid forming--soft mould
rubber roller
KY-901 liquid addition silicone rubber
Product introduction:
two part liquid component, this kind of silicone rubber has no thickness restriction, need to be heated for curing.
can be worked at -49-200°C
it was elastomer which can be made as soft as jelly or as hard as wood.
Good flame resistance
high strength and dielectric performance
Main index:
| KY901-1 | KY901-2 | KY901-3 |
Appearance | transparent | Half-transparent | Specific color |
Viscosity(Pa.s) | 0.2~5 | 2~5 | 10~50 |
Cure time(min) | Upon your requirements | Upon your requirements | Upon your requirements |
Shore hardness | 20~30 | 20~40 | 30~70 |
Stretch strength(MPa) | ≥0.4 | ≥1.0 | ≥2.5 |
Tear apart extension rate(%) | 100~150 | 100~150 | 50~80 |
volume resistivity(Ω) | ≥1.9×1015 | ≥1×1015 | ≥2×1015 |
Dielectric constant(HZ) | >3.0 | >3.0 | >3.0 |
dielectric loss angle tangent value(10HZ×106) | ≤1×10-3 | ≤2×10-3 | ≤3×10-3 |
Dielectric strength(KV/mm) | ≥15 | ≥15 | ≥15 |
How to use?
supplied as two part liquid component kits comprised of base/curing agent, mixed in a 1:1 ratio by weight or volume, pouring the compound before the foam automatically dispersed. For the high viscosity kind compound, vacuum facility can be used to defoam, the time of curing can be adjusted to fit your specific demands.
Usage:
1.Encapsulants for electric components such as Outdoor LED panel, high voltage electric products
2.Soft mold material
