1,100% silicone rubber.
2,Self-leveling consistency
3,Forms flexible, long lasting seal.
4Extreme temperature performance

Silicone rubber special adhesive Q-M01

      Q-M01 is a single component silicone with excelent liquidity and nice properties. The principle is under the influence of room temperature, to occur chemical reactionsof  components and water molecules in the atmosphere, in order to agglutinate the silicone rubber.

     Properties:

  Acetic acid curing system

  Excellent liquidity

  Good adhesion property

     Serviceable range:

  All-purpose adhesive especially for silicone rubber.

Data:

Color: transparent

Specific gravity(23°C  [g/cm3]): 1.06

Viscosity (23°C   [mPa s] ): 65000

Storage:

  Store in airtight containers(5°C-25°C), period of validity is no less than 9 months, please refer to the label.

    Related data:

  2mm, store 14 days under the condition of 23°C, relative humidity 50%.

  Color: transparent

  Specific gravity 23°C in water  DIN 53 479 A, ISO 2781         [g/cm3]   1.06

  Shore A       DIN 53 505, ISO 868                            30

  Elongation at break    DIN 53 504-S 1, ISO 37           [%]            500

  Tensile strength  DIN 53 504-S 1, ISO 37         [N/mm2]          4.5

  Tearing strength    ASTM D 624 B                 [N/mm]          13.0

Curing:

  Time of “skins”:  (23°C 50%RH ) 10-25min

  Time of fully cures and bonds: (23°C 50%RH ) 12-24h/mm

  The data above is just as a kind of guard when producing, subject to the production data.

  It can not replace the test by the customer to ensure that Dow Corning's products are safe, effective, and fully satisfactory for their special use.

Cautions:

  During the curing, there will be acetic acid gas( depends on the gross), which will cause unwell to human who work in this conditions for long time. In case of eye contact, immediately flush eyes with plenty of water