Conventional Smoke and Heat Detector EN54
1.Power:9V to 35V DC;
2.Infrared optical sensing;
3.Easy installation;
4.Dual LEDS
Conventional smoke and heat detector from PEASWAY.
Detectors for system:
The range include:
PW-628S-2 | 2-wire optical smoke detector |
| PW-628S-4 | 4-wire optical smoke detector |
| PW-628S-2L | 2-wire optical smoke detector with remote LED output |
| PW-628H-2 | 2-wire heat detector |
| PW-628H-4 | 4-wire heat detector |
| PW-628H-2L | 2-wire heat detector with remote LED output |
| PW-628SH-2 | 2-wire smoke and heat detector |
| PW-628SH-4 | 4-wire smoke and heat detector |
| PW-628SH-2L | 2-wire smoke and heat detector with remote LED output |
specifications:
Model | 2/4 Wire | Thermal | Volt. DC | Startup Current (Max) | Alarm Current (Max) | Surge Current (Max) | Startup Time (Max) | Permis. Current (Max) | Freq. | Alarm Contact |
PW-628S-2 | 2 |
| 9~35V | 35 µA | 70 mA | 40µA | 60 s | 80 mA | 3~5 sec |
|
PW-628S-4 | 4 |
| 9~35V | 35 µA | 35 mA | 40µA | 60 s | 80 mA | 3~5 sec | From A/B |
PW-628S-2L | 2 |
| 9~35V | 35 µA | 70 mA | 40µA | 60 s | 80 mA | 3~5 sec |
|
PW-628H-2 | 2 | 135 F (57 C) | 9~35V | 35 µA | 70 mA | 40µA | 60 s | 80 mA | 3~5 sec |
|
PW-628H-4 | 4 | 135 F (57 C) | 9~35V | 35 µA | 35 mA | 40µA | 60 s | 80 mA | 3~5 sec | From A/B |
PW-628H-2L | 2 | 135 F (57 C) | 9~35V | 35 µA | 70 mA | 40µA | 60 s | 80 mA | 3~5 sec |
|
PW-628SH-2 | 2 | 135 F (57 C) | 9~35V | 35 µA | 70 mA | 40µA | 60 s | 80 mA | 3~5 sec |
|
PW-628SH-4 | 4 | 135 F (57 C) | 9~35V | 35 µA | 35 mA | 40µA | 60 s | 80 mA | 3~5 sec | From A/B |
PW-628SH-2L | 2 | 135 F (57 C) | 9~35V | 35 µA | 70 mA | 40µA | 60 s | 80 mA | 3~5 sec |
|
Smoke Sensitivity | EN 54-5/7:2000 |
Detection Range | 100 square meters rating for smoke sensor; 50 square meters rating for heat sensor |
Start-Up Current | 70 µA Max |
Alarm Impedance | For 2-wire models: 100Ω+3V max; 560Ω+3V max (red LED open circuit) |
Reset Voltage | Less than 1 volt |
Reset Time | Less than 1 sec |
Alarm Indicator | LED Continuously emitting red light |
Temp range | -10°C to 50°C |
Remote Output | 15 mA max, diode gate |
Humidity | 0 to 95% RH, noncondensing |
Alarm Contact | For 4-wire: N/O or N/C Operation |
| Form A: 1.0A@30VDC/0.5A@125VAC |
Dimensions | 100mm (d) x 47mm (h) with base |
Weight | 130g/set with base |
Please contact with us for more information of this series smoke detector.
