gelato hard ice cream machine
1.CE approved.
2.SGS certificate.
3.Refrigerant-R404A
4.compressor-Tecumesh from France
Specifications:
MODEL | M-01 | M-02 | M-03 | M-04 | M-05 |
Cylinder Capacity/ L | 4 | 6 | 10 | 18 | 35 |
Quantity gelato/sorbet per cycle/Min. input(L) |
1.2 |
1.5 |
2.5 |
4 |
10 |
Quantity gelato/sorbet per cycle/Max. input(L) |
2.8 |
4.2 |
7 |
13 |
21 |
Batch Time/Min | 5-12 | 6-12 | 6-15 | 8-15 | 10-18 |
Hourly quantity/Min mix produced(L) |
12 |
18 |
30 |
50 |
80 |
Hourly quantity/Max mix produced(L) |
24 |
36 |
60 |
90 |
140 |
Beater Motor/Kw | 1.1 | 3 | 3 | 4 | 4 |
Compressor Motor/Kw | 1.5 | 2.25 | 3 | 3.75 | 4.5 |
Electrical Specifications/Volt | 220 | 220/380 | 220/380 | 380 | 380 |
Electrical Specifications/Hz | 50/60 | 50/60 | 50/60 | 50/60 | 50/60 |
Electrical Specifications/Ph | 1 | 1 or 3 | 1 or 3 | 1 or 3 | 1 or 3 |
Refrigerant Type | R-404A | R-404A | R-404A | R-404A | R-404A |
Condenser | Water or Air | Water or Air | Water or Air | Water or Air | Water or Air |
Nominal power/Kw | 2.45/2.6 | 5.05/5.2 | 5.85/6 | 7.55/7.7 | 8.95/9.1 |
Dimensions L x W x H/cm | 45X80X78 | 48X72X130 | 55X72X132 | 58X88X142 | 69X92X142 |
Net weight / Kg | 110 | 199 | 220 | 260 | 310 |
Water use L / H | 250 | 300 | 450 | 500 | 500 |
Note:
The voltage and the frequency can be set up according to different countries’ standard
General Introduction:
This machine is adopted the advanced freezing cylinder design and the promoted beater and it is assembled with the technical grade frequency converter which can save the energy, start and stop very quietly and help to extend the working life of the compressor and churning motor. It is allocated with the French Tecumesh compressor cooling system and American Sporlan expansion valve, etc. The warranty period of the imported compressor and the parts is 3 years and the warranty period of the whole machine is 1 year.
Features:
1. The whole machine is controlled by the computer intelligent system with large LCD screen. The machine operating status is shown in the graphics whose interface can reflect the communication between the operator and the machine. The preference was protected by the password which can prevent the operation by mistake.
2. Quantized and selective automatic control system.
3. Output is adopted the low noise and undisturbed technology.
4. The high efficient evaporator construction and the multipoint linear heat-conducting control can batch freeze very fast.
5. Three phrases stainless steel dasher with module design scrape the materials thoroughly. And it can be discharged conveniently and cleaned easily.
6. High impact extrusion technology avoids the mix of different flavors.
7.There are many security modules and self trouble diagnosis system inside.
8. Humanistic slant control faceplate.
9.Closed cleaning water source help to work efficiently and sanitarily.
10.Adpoting the UFI approved environmental-friendly refrigerant R404A.
