Hot dog broiler
keep warm automatically,
heating is even.the sausage which roassted, its color,smell and taste is unique

The Hot Dog Broiler WYK-896 and WYK-896-B are new products of our company. They have the advantages of smart, easily-operated and fast heating. The roller is sprayed with non-sticky cover, so it is easy to clean. This is your best choice for hot dogs.

A.  Specifications:

Name	model	pressure	output	frequency	Size(mm)
Hot dog broiler	WYK-896	220V~	1.6Kw	50Hz	660x480x630
Hot do broiler	WYK-896-B	220V~	1.4Kw	50Hz	400x330x600

  When being transported, be careful not to shake the machine violently or crash it with anything else; don’t put it outdoors or in the direct sunlight. If so, avoid rainfall; Store it in ventilated places out of erosive gases; Don’t put it up-side-down.

C.   Installation and conditions:

1. Put it stable on the ground level, use a suitable switch, a fusion and a protected mode near the warmer. Don’t store too much rubbish around to make it easy to operate.

2. The pressure should be the same as the machine’s (about +10%).

3. Make sure the wires contact well and firmly, the output is suitable and the ground wires are safe before using.

.4. All the connection and installation should be done by qualified electricians.

D.   OperationAdd some plant oil to the two ends of the roller to make it move well.Connect the power and the light will be on, turn the switch K1 to start the motor, the roller will move too. Put the hot dogs on the roller, you can lay them on all the rollers or the front rollers, it depends on how many hot dogs you are going to roast. Turn on the temperature controller and set the temperature to what you want. The temperature of the roller begins to rise, when it reaches the fixed temperature, it can be cut off itself, then the temperature drops; when it is lower to the fixed temperature, the controller will connect the power and heat again. Repeating this the temperature will be kept constant and the food is preserved.

Suggestion: It is better to set the temperature to 1~2 when you roast hot dogs.

3.There is a switch for the light, you can decide whether to turn on or off the light.