solar thermal collector
1.CE,Solar Keymark,EN12975
2.High working efficiency
3.5 years warranty time
4.Heat pipe collector
solar thermal collector
The JINYI Solar collector offer excellent value as they have a very low cost per kWh of output.
The collectors are also very easy to transport and handle as the tubes can be disconnected from the manifold of the collector.
The JHC collectors are heat pipe type collec tors in which the tubes transfer the collected energy to the manifold, where it heats the solar fluid.
They are ideal for different latitudes due to their high efficiency, especially advanced in high latitude area, even in cold winter.
These models incorporate 18pcs evacuated tubes
Benefits
Collects free solar energy and reduces dependence on expensive fossil fuels
Good for the environment; reduces emissions of CO2 and other pollutants
Excellent value
Heat Pipe technology means collector can be easily transported and then assembled on-roof
Can be installed on-roof initially and have the tubes added later during commissioning
Operating parameters
Maximum fluid pressure: 12 bar
Maximum Operating fluid pressure: 6 bar
Maximum service temperature: 95 °C
Maximum stagnation temperature: 221°C
Recommended tilt angle: 15° - 75°
Nominal flow rate: 160 l/h
Optical Efficiency (n0): 0.751
Linear Loss Co-efficient (a1): 2.57 W/m²K
Quadratic Loss Co-efficient (a2): 0.0036 W/m²K²
Dimension: 1970 (length) x 1495 (width) x 130 (height) mm
Weight: 55 Kg
Packing volume: 0.28m³
| Mode | Collecting Area | Vacuum tube Qty(pcs) | L/W/H(mm) | Gross wet(kg) | Loading Qty (set) 20'/40'/40'HQ |
| JHC-5818-12 | 1.52 | 12 | 1960×1025×130 | 39.6 | 145/300/342 |
| JHC-5818-15 | 1.91 | 15 | 1960×1250×130 | 48.3 | 135/270/310 |
| JHC-5818-18 | 2.30 | 18 | 1960×1475×130 | 57.1 | 110/225/251 |
| JHC-5818-20 | 2.56 | 20 | 1960×1625×130 | 62.9 | 104/210/236 |
| JHC-5818-24 | 3.08 | 24 | 1960×1925×130 | 76.9 | 90/180/200 |
| JHC-5818-30 | 3.85 | 30 | 1960×2375×130 | 94.3 | 67/148/175 |
The Principle of Thermosyphon (Solar thermalcollector)
Metal Heat Pipe Solar Thermal Collector consists of a evacuated tube, a heat pipe, a metal heat absorption wing and the connecting manifold. The metal heat absorption wing with selective absorption coating converts solar energy into heat energy and transfers it medium liquid inside. The vacuum between the two glass tubes works as insulation. The liquid in the heat pipe changes into vapor which rises to the condenser. When passing through the heat exchanger, the heat is absorbed and the temperature is lowed, and the vapor becomes liquid, returns to the base of the heat pipe. This transference of heat is a continuous circulation as long as the collector is heated by the sun.
