Vacuum Tube Solar Collector
1.CE,ISO,CCC approved
2.Pressurized Vacuum Solar Collector with Heat Pipe
3.10 Year's Experienc

Working principle:
1) When the temperature of the heat collector reaches the set value, the controller will make shall the circulation pump work automatically.
2) The circulation pump makes heat-conducting liquid circulate automatically.
3) The heat-conducting liquid transfers heat to water by the heat exchanger in the tank.
4) In case the temperature of the circulation pump does not reach the set value, the circulation pump will be shut automatically.
5) In case the temperature of the tank does not reach Tm ax, then start the auxiliary heating device.

Feature:
Collector separates with storage tank. The tank can be put in any place of house. And the collector can be put on the inclined roof or flat place.
Module design, arbitrary combination, harmony with the building perfectly;
Intelligent control and automatic operation;
Anti-freeze: No water inside the tubes when it works.
The system controller has the anti-freezing function is that the temperature circulation will operate while it reaches the fixed temperature.
Multifunction: Bathing, washing, domestic heating etc;
Work at anytime and enjoyable. 

Structure:
Model No: 100L 150L 200L 300L.

 

Vacuum Tube Solar Collector with Heat Pipe:

JINENG SOLAR Vacuum Tube Solar Collector Specification:
Type:	Vacuum Tube Solar Collector with Heat Pipe
Vacuum Tube:	Borosilicate 3.3, ALN-SS/CU Coated Layer
Tube Dimension	Inner Tube	47mm
	Outer Tube	58mm
Length	1800mm
Tube Qty.:	15/18/20/24/30 tubes
Manifold:	Aluminum
Frame:	Aluminum
Vacuum Tightness	5.0*10-3 Pa
Heat Insulation Layer:	Rock Wool
Collector Mounting:	Flat Roof/Sloping Roof
Heat preservation:	72 hours
Hail Resistance:	25mm
Cold Resistence	-40°C
Hot Temp Resistence	260°C
Life	15 Years
Certificate:	CE, Solar Keymark, EN12975-1/2, CCC, ISO9001
Appliance:	Domestic Hot Water Heating, Pool Heating, Radiant Infloor Heating, Air Heating.